Measurement's report RME ADI-2-4 Pro SE Balanced Out - Reference Audio Analyzer

RME ADI-2-4 Pro SE

Balanced Out
About this report
This is a report for professionals with a suite of test of headphone amplifier.
You can see a simple report for "dummies" with explanations of the main characteristics for RME ADI-2-4 Pro SE Balanced Out

A suite of tests for a headphone amplifier can be applied to just a universal output without a formal presence of an amplifier, if in this mode you can connect headphones to this output. Based on the results of the tests, you can understand the real picture, is the output powerful enough or not, with the initial data on the circuitry as a "black box".

Line-out, differences from the output for headphones and speakers

Advantages and disadvantages of balanced amplifiers

Test report - general data RME ADI-2-4 Pro SE (as headphone amplifier)

Frequency response, Impedance and Frequency response with standard headphones

Your browser does not support Canvas

Voltage levels from the load at the output of the amplifier

Your browser does not support Canvas

Average value of impedance band in 40 Hz - 15 kHz0.4ohm
Voltage:
Linear Mode / Maximum or before clipping level
25.1/25.1dBV
18.0/18.0VRMS
Current:
Linear Mode / Maximum or before clipping level
48.1/48.1dB(mA)
255.2/255.2mA





Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.





Frequency response RME ADI-2-4 Pro SE Balanced Out (as headphone amplifier)

Your browser does not support Canvas
Graphics setting view
Channel

Range

Channel:LeftRight
Variation in frequency response in band from 40 Hz - 15 kHz -0.1, +0.0-0.1, +0.0dB



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response



Impedance RME ADI-2-4 Pro SE Balanced Out (as headphone amplifier)

Your browser does not support Canvas
Graphics setting view
Channel

Channel:LeftRight
Impedance average in band from 40 Hz - 15 kHz0.4 0.5ohm
The minimum value in band from 40 Hz - 15 kHz0.4 0.5ohm
The maximum value in band from 40 Hz - 15 kHz0.4 0.5ohm


Comparison of basic characteristics AMPs


Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Crosstalk RME ADI-2-4 Pro SE Balanced Out (as headphone amplifier)

Your browser does not support Canvas
Graphics setting view
Channel

Range

Load

Channel:LeftRight
Crosstalk @ 1 kHz @ 15.8 ohm -101.9 -99.2dB
Crosstalk @ 1 kHz @ 24.5 ohm -101.8 -100.1dB
Crosstalk @ 1 kHz @ 30.5 ohm -100.6 -104.3dB
Crosstalk @ 1 kHz @ 62.4 ohm -101.6 -102.0dB
Crosstalk @ 1 kHz @ 100.0 ohm -98.6 -101.2dB
Crosstalk @ 1 kHz @ 198.9 ohm -98.3 -101.4dB
Crosstalk @ 1 kHz @ 300.0 ohm -106.3 -103.7dB
Crosstalk @ 1 kHz @ 763.0 ohm -100.4 -101.0dB
Crosstalk @ 1 kHz @ Not loaded-99.9 -96.8dB



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Crosstalk Phase RME ADI-2-4 Pro SE Balanced Out (as headphone amplifier)

Your browser does not support Canvas
Graphics setting view
Channel

Load




Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Frequency response RME ADI-2-4 Pro SE Balanced Out with resistive load

Your browser does not support Canvas
Graphics setting view
Channel

Range

Frequency response of amplifier with resistive load @ 40 Hz - 15 kHz
Channel:LeftRight
TEST 16 ? + RME ADI-2-4 Pro SE Balanced Out 0.00.0dB
TEST 32 ? + RME ADI-2-4 Pro SE Balanced Out 0.00.0dB
TEST 64 ? + RME ADI-2-4 Pro SE Balanced Out 0.00.0dB
TEST 126 ? + RME ADI-2-4 Pro SE Balanced Out 0.00.0dB
TEST 256 ? + RME ADI-2-4 Pro SE Balanced Out 0.00.0dB
TEST 512 ? + RME ADI-2-4 Pro SE Balanced Out 0.00.0dB



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response



Frequency response RME ADI-2-4 Pro SE Balanced Out loaded dynamic headphone type

Your browser does not support Canvas
Graphics setting view
Channel

Range

Frequency response of amplifier loaded dynamic headphone type @ 40 Hz - 15 kHz
Channel:LeftRight
TEST 10000 ? + RME ADI-2-4 Pro SE Balanced Out 0.00.0dB
Grado GH4 Limited Edition + RME ADI-2-4 Pro SE Balanced Out 0.10.1dB



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response



Frequency response RME ADI-2-4 Pro SE Balanced Out loaded type balance armature headphone type

Your browser does not support Canvas
Graphics setting view
Channel

Range

Frequency response of amplifier loaded type balance armature headphone type @ 40 Hz - 15 kHz
Channel:LeftRight
TEST 10000 ? + RME ADI-2-4 Pro SE Balanced Out 0.00.0dB
Campfire Audio Andromeda + RME ADI-2-4 Pro SE Balanced Out 0.80.8dB
Fearless Audio S8F Freedom + RME ADI-2-4 Pro SE Balanced Out 0.70.6dB



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response



THD vs load vs output voltage RME ADI-2-4 Pro SE Balanced Out

Your browser does not support Canvas
Graphics setting view
Channel

Load

Harmonic, number

Your browser does not support Canvas
Graphics setting view
Channel

Load

Harmonic, number

Your browser does not support Canvas
Graphics setting view
Channel

Load


Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Maximum voltage output level vs load RME ADI-2-4 Pro SE Balanced Out

Your browser does not support Canvas
Graphics setting view
Type of chart

RAW coordinates

Power characteristics of the Voltage Current
dBVVRMSdB(mA)mA
Equivalent class A 25.118.048.1255.2
Equivalent class AB 25.118.048.1255.2
Equivalent class B 25.118.048.1255.2
Maximum mode 25.118.048.1255.2


Volume Control TypeDigital
Optimal range of volume control67.0dB
Signal/Noise / Maximum137.0/25.1dB/dBV
Signal/Noise @ -14.9 dBV 32 ohm (1 mW)97.07dB
Signal/Noise @ -5.2 dBV 300 ohm (1 mW)106.67dB


Comparison RME ADI-2-4 Pro SE Balanced Out and another amplifiers by loudness (Volume Level)

Main characteristics of the RME ADI-2-4 Pro SE Balanced Out


Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Maximum voltage output level vs load RME ADI-2-4 Pro SE Balanced Out

Your browser does not support Canvas
Graphics setting view
Type of chart

RAW coordinates

Maximum Amplifier Voltage Level
Load Pure or equal class AOptimal or equal class ABHard or equal class BMax, before clipping
dBVVRMSdBVVRMSdBVVRMSdBVVRMS
15.8 ohm 12.44.212.44.212.44.212.44.2
24.5 ohm 16.56.616.56.616.56.616.56.6
30.5 ohm 17.57.517.57.517.57.517.57.5
62.4 ohm 23.515.023.515.023.515.023.515.0
100 ohm 24.116.024.116.024.116.025.116.0
198.9 ohm 25.118.025.118.025.118.025.118.0
300 ohm 25.118.025.118.025.118.025.118.0
763 ohm 25.118.025.118.025.118.025.118.0
Not loaded25.118.025.118.025.118.025.118.0



Maximum level of amplifier current
Load Pure or equal class AOptimal or equal class ABHard or equal class BMax, before clipping
dB(mA)mAdB(mA)mAdB(mA)mAdB(mA)mA
15.8 ohm 48.4263.048.4263.048.4263.048.4263.0
24.5 ohm 48.7271.248.7271.248.7271.248.7271.2
30.5 ohm 47.8245.547.8245.547.8245.547.8245.5
62.4 ohm 47.6241.247.6241.247.6241.247.6241.2
100 ohm 44.1159.844.1159.844.1159.845.1179.3
198.9 ohm 39.190.439.190.439.190.439.190.4
300 ohm 35.660.035.660.035.660.035.660.0
763 ohm 27.523.627.523.627.523.627.523.6


Power
Load Pure or equal class AOptimal or equal class ABHard or equal class BMax, before clipping
dBmmWdBmmWdBmmWdBmmW
15.8 ohm 30.41092.530.41092.530.41092.530.41092.5
24.5 ohm 32.61802.532.61802.532.61802.532.61802.5
30.5 ohm 32.61837.832.61837.832.61837.832.61837.8
62.4 ohm 35.63629.035.63629.035.63629.035.63629.0
100 ohm 34.12554.834.12554.834.12554.835.13216.3
198.9 ohm 32.11624.232.11624.232.11624.232.11624.2
300 ohm 30.31078.630.31078.630.31078.630.31078.6
763 ohm 26.3424.926.3424.926.3424.926.3424.9



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



   

Spectrum of Total Harmonic Distortion vs Level RME ADI-2-4 Pro SE Balanced Out (as headphone amplifier)

Your browser does not support Canvas
Graphics setting view
Channel

Level

Range

Your browser does not support Canvas
Graphics setting view
Channel

Level

Range

Your browser does not support Canvas
Graphics setting view
Channel

Shift

dBm

Range

Your browser does not support Canvas
Graphics setting view
Channel

Shift

dBV

Range




Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



   

Spectrum of Multitone Distortion vs Level vs Load RME ADI-2-4 Pro SE Balanced Out (as headphone amplifier)

Your browser does not support Canvas
Graphics setting view
Channel

Level

Range

Your browser does not support Canvas
Graphics setting view
Channel

Level

Range

Your browser does not support Canvas
Graphics setting view
Channel

Shift

dBm

Range

Your browser does not support Canvas
Graphics setting view
Channel

Shift

dBV

Range


Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



   

Spectrum of IMD SMPTE vs Level RME ADI-2-4 Pro SE Balanced Out (as headphone amplifier)

Your browser does not support Canvas
Graphics setting view
Channel

Level

Range

Range

Your browser does not support Canvas
Graphics setting view
Channel

Level

Range

Range

Your browser does not support Canvas
Graphics setting view
Channel

Shift

Range

dBm

Range

Your browser does not support Canvas
Graphics setting view
Channel

Shift

Range

dBV

Range


Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



   

Spectrum of IMD CCIF vs Level RME ADI-2-4 Pro SE Balanced Out (as headphone amplifier)

Your browser does not support Canvas
Graphics setting view
Channel

Level

Range

Your browser does not support Canvas
Graphics setting view
Channel

Level

Range

Your browser does not support Canvas
Graphics setting view
Channel

Shift

dBm

Range

Your browser does not support Canvas
Graphics setting view
Channel

Shift

dBV

Range


Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.





More detailed

Measurements of RME ADI-2-4 Pro SE Balanced Out were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The RME ADI-2-4 Pro SE Balanced Out test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a headphones and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com



Information for Authors. You can freely use the graphics in your articles with a link to us.












Original text in Russian page. Translation page is not yet ready

You can help with translation via the: facebook and feedback.




Comments

Commentary view:





romanrex
Изображения, медиа и смайлы доступны в исходном чате.
2024-11-29 14:35:36

Комментарий к профессиональному отчету RME ADI-2-4 Pro SE ADC
Этот отчет располагается в категории ЦАП, но на деле это тест АЦП.

Наконец дошли руки до обработки отчета АЦП от RME ADI-2-4 Pro SE.
Если не изменяет память, то мы тогда в качестве источника использовали E-MU1616m, у которой нет сюрпризов в виде ESS hump и прочих странностей, но условно не самые низкие уровни гармоник низких порядков.

Это как выглядит оцифровка одной 1616m на другую 1616m
https://reference-audio-analyzer.pro/report/dac/e-mu-1616m.php

А это с 1616m на RME ADI-2-4 Pro SE
https://reference-audio-analyzer.pro/report/dac/rme-adi-24-adc.php

Итого, RME ADI-2-4 Pro SE получше с точки зрения сигнал/шум и может быть будет лучше для получения такого параметра как SINAD на уровнях около 0 dBFS, но линейность в виде лишних искажений хромает. Предварительно искажения ниже, чем у E1DA Cosmos, но принципиально с точки зрения линейности - хуже, чем 1616m. Так что 1616m пока полноценно не на что менять...

Интересно было бы протестировать Lynx Hilo ...
Reply


Want to leave a comment or ask a question? Register now or log in