TEST 16 ? Measurement's report - Reference Audio Analyzer

Reports / TEST / Headphones 16 Ω - report for a pro

TEST Headphones 16 Ω (report for a pro)

After testing in the benchmark mode in the Reference Audio Analyzer software, the data is added to the online database of the RAA website.

You can view the test results on the comparison pages and summary reports for beginners and professionals. You can go to the desired report or comparison/selection service through the menu on this page. Additionally, you can go to the comparison pages from any graph in this report and add other tested products for direct comparison.



This is a summary report of headphones for professionals.

You can additionally look for TEST 16 ?






Sensitivity average in band from 100 Hz - 10 kHz0.0dB/V SPL
-18.0dB/mW SPL
Impedance average in band from 40 Hz - 15 kHz16.0ohm
For 90 dB SPL, a voltage is required90.0dBV
31622.777VRMS
Taking into account the peak factor of 9 dB for the music signal99.0 dBV
89125.094VRMS
Measurements were performed on the stand:HDM-X


Frequency response TEST 16 ? headphone

АЧХ - Стенд: HDM-X

Your browser does not support Canvas
Graphics setting view
Channel

Range

Frequency band

Smoothing


Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Impedance / Electric phase TEST 16 ? headphone

Your browser does not support Canvas
Graphics setting view
Channel

Frequency band


Channel:LeftRight
Impedance average in band from 40 Hz - 15 kHz16.0 16.0ohm
Resistance at 1 kHz16.0 16.0ohm
Resistance at 500 Hz16.0 16.0ohm
The minimum value in band from 40 Hz - 15 kHz16.0 16.0ohm
The maximum value in band from 40 Hz - 15 kHz16.0 16.0ohm


Your browser does not support Canvas
Graphics setting view
Channel

Range

Frequency band


Channel:LeftRight
Phase deviation is the average in the range 40 Hz - 15 kHz0.0 0.0°
Phase at 1 kHz0.0 0.0°
Phase at 500 Hz0.0 0.0°
The minimum value in band from 40 Hz - 15 kHz0.0 0.0°
The maximum value in band from 40 Hz - 15 kHz0.0 0.0°



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Frequency response and sensitivity TEST 16 ? headphone

Your browser does not support Canvas
Graphics setting view
Channel

Frequency band

Smoothing


Channel:LeftRight
Sensitivity average in band from 100 Hz - 10 kHz0.0 0.0dB/V SPL
Sensitivity average in band from 100 Hz - 10 kHz-18.0-18.0 dB/mW SPL
Sensitivity at 1 kHz0.00.0dB/V SPL
Sensitivity at 500 Hz0.00.0dB/V SPL


Your browser does not support Canvas
Graphics setting view
Type of chart

SPL


SPLVoltageCurrentPower
dB SPLdBVVRMSdB(mA)mAdBmmW
6060.0100095.96250078.062500000
7070.0316210619764288.0625000000
8080.01000011662500098.06250000000
9090.031623126197642410862500000000
1001001000001366250000118625000000000
110110316228146197642351286250000000000
12012010000001566250000013862500000000000
1301303162278166197642354148625000000000000



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Other summary reports for TEST 16 ? headphone

report for a newbie

Your browser does not support CanvasA simple report for beginners with explanations of the main characteristics.

Compatibility with amplifier sources

Your browser does not support CanvasA report evaluating the compatibility of TEST 16 ? with various amplifier sources.

Target curves and equalization

Your browser does not support CanvasA report with an assessment of compliance with target curves and recommended settings for TEST 16 ? equalization



More detailed

Measurements of TEST 16 ? were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The TEST 16 ? test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a source amplifier and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com



Information for Authors. You can freely use the graphics in your articles with a link to us.












Original text in Russian page. Translation page is not yet ready

You can help with translation via the: facebook and feedback.




Comments

No comments to TEST Headphones 16 Ω
Commentary view:





Want to leave a comment or ask a question? Register now or log in