Measurement's report Monster Beats by Dr. Dre Studio test and graphs - Reference Audio Analyzer

Monster Beats by Dr. Dre Studio is available in reports and services. You are in a professional report.

Service and suite of tests

Information for all

Comparison of on-line graphs

Information for professionals

report for a pro

Comparison of on-line graphs


Reports / Monster Beats / by Dr. Dre Studio / report for a pro

Conducted technical work on updating the report. Charts may temporarily not be displayed at the time of the work.

Monster Beats by Dr. Dre Studio (report for a pro)



Test report - general data of Monster Beats by Dr. Dre Studio headphone

Frequency response, Impedance, Frequency response with standard AMPs


Graphics setting view
Stands:
Range, dB:

Perception of headphone frequency response curves of equal loudness ISO 226-2009


General results
General results Monster Beats by Dr. Dre Studio
Channel
Center/Summary
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
115,2
Impedance average in band from 40 Hz to 15 kHz, ohm
212,5
For 94,0 dB SPL need, VRMS
0,087
For 94,0 dB SPL need, mW
0,035

The table shows a most important technical characteristics of Monster Beats by Dr. Dre Studio

*Center channel headphone is received by averaging between left and right channels



Test conditions
  • Type of headphones: Over-ear
  • Measurements were performed on the stands:
    • with on the simulator of human head with ears HDM1
    • with soft flat stand SF1
  • Table's data are based on the results from the test stand HDM1



Sensitivity of Monster Beats by Dr. Dre Studio headphone


Graphics setting view
Stands:
Channel:




Table of measured characteristics
Sensitivity Monster Beats by Dr. Dre Studio
Channel
Left
Right
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
115,6
114,8
Sensitivity at 500 Hz at 1 V, dB
121,6
121,0
Sensitivity at 500 Hz at 1 mW, dB
111,2
111,3
Sensitivity at 1000 Hz at 1 V, dB
114,4
113,3
Sensitivity at 1000 Hz at 1 mW, dB
104,2
103,1

The sensitivity was calculated by data from the measuring stand HDM1


Frequency response of Monster Beats by Dr. Dre Studio headphone


Graphics setting view
Stands:
Range, dB:
Channel:




Table of measured characteristics
Frequency response Monster Beats by Dr. Dre Studio
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-9,32, 8,87
-8,86, 8,71


The RMS variation between the right and left channels
Monster Beats by Dr. Dre Studio from stand SF1
Deviation between channels in band 40 Hz to 15 kHz, dB
1,0
Deviation between channels in low-frequency range 40 Hz to 200Гц, дБ
1,0
Deviation between channels in mid-frequency range 200 Hz to 2 kHz, dB
1,3
Deviation between channels in hi-frequency range 2 kHz 15 kHz, dB
0,6

Impedance of Monster Beats by Dr. Dre Studio headphone


Graphics setting view
Channel:




Table of measured characteristics
Impedance Monster Beats by Dr. Dre Studio
Channel
Left
Right
Impedance average in band from 40 Hz to 15 kHz, ohm
213,3
211,7
Resistance at 500 Hz, ohm
213,0
211,7
Resistance at 1000 Hz, ohm
212,2
210,8
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
14990,4
14990,4
The minimum value in band from 40 Hz to 15 kHz, ohm
209,4
208,1
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
70,0
50,0
The maximum value in band from 40 Hz to 15 kHz, ohm
217,4
215,9

Electric phase of Monster Beats by Dr. Dre Studio headphone


Graphics setting view
Range, degree:
Channel:




Table of measured characteristics
Electric phase Monster Beats by Dr. Dre Studio
Channel
Left
Right
Average variation in phase response in band from 20 Hz to 20 kHz, degree
-1,1
-1,2
The minimum value in band from 20 Hz to 20 kHz at frequency, Hz
20000,0
20000,0
The minimum value in band from 20 Hz to 20 kHz, degree
-5,5
-5,4
The maximum value in band from 20 Hz to 20 kHz at frequency, Hz
38,7
20,7
The maximum value in band from 20 Hz to 20 kHz, degree
0,4
-0,1

Frequency response of Monster Beats by Dr. Dre Studio headphone when connected to amplifiers with constant output impedance


Graphics setting view
Stands:
Range, dB:
Channel:




Table of measured characteristics
Frequency response of headphone Monster Beats by Dr. Dre Studio with amplifier with a constant impedance
Channel
Left
Right
Variation in FR from AMP 0 ohm in band 100 Hz to 10 kHz, dB
-7,11, +6,03
-7,79, +6,84
Variation in FR from AMP 10 ohm in band 100 Hz to 10 kHz, dB
-7,11, +6,04
-7,79, +6,83
Variation in FR from AMP 20 ohm in band 100 Hz to 10 kHz, dB
-7,11, +6,04
-7,79, +6,83
Variation in FR from AMP 50 ohm in band 100 Hz to 10 kHz, dB
-7,11, +6,06
-7,79, +6,82
Variation in FR from AMP 100 ohm in band 100 Hz to 10 kHz, dB
-7,12, +6,08
-7,80, +6,81
Variation in FR from AMP 300 ohm in band 100 Hz to 10 kHz, dB
-7,12, +6,12
-7,80, +6,80

Deviation of frequency response of Monster Beats by Dr. Dre Studio headphone when connected to amplifiers with constant output impedance


Graphics setting view
Stands:
Range, dB:
Channel:




Table of measured characteristics
Variation in frequency response with amplifiers with constant output resistance from Monster Beats by Dr. Dre Studio
Channel
Center/Summary
With amplifier impedance at 10 ohm in band 20 Hz to 20 kHz, dB
0,0
With amplifier impedance at 20 ohm in band 20 Hz to 20 kHz, dB
0,0
With amplifier impedance at 50 ohm in band 20 Hz to 20 kHz, dB
0,1
With amplifier impedance at 100 ohm in band 20 Hz to 20 kHz, dB
0,1
With amplifier impedance at 300 ohm in band 20 Hz to 20 kHz, dB
0,2

*Center channel is received by data averaging between the left and right channels


Frequency response of Monster Beats by Dr. Dre Studio headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


Graphics setting view
Stands:
Range, dB:
Channel:




Table of measured characteristics
Frequency response with an amplifier with zero output resistance and raising of output resistance in low frequencies from Monster Beats by Dr. Dre Studio
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-9,31, 8,81
-8,85, 8,63

Deviation of frequency response of Monster Beats by Dr. Dre Studio headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


Graphics setting view
Stands:
Range, dB:
Channel:




Table of measured characteristics
Variance of frequency response Monster Beats by Dr. Dre Studio depending on the total output resistance of the amplifier with zero resistance and a rise of resistance at low frequencies
Variance frequency response at the frequency 20 Hz, dB
-1,0
Variance frequency response at the frequency 20 Hz, dB
-1,0
Variance frequency response at the frequency 40 Hz, dB
-0,4
Variance frequency response at the frequency 40 Hz, dB
-0,4
Variance frequency response at the frequency 80 Hz, dB
-0,1
Variance frequency response at the frequency 80 Hz, dB
-0,1

Perception of headphone frequency response curves of equal loudness ISO 226-2009 of Monster Beats by Dr. Dre Studio headphone


Graphics setting view
Stands:
Channel:




Table of measured characteristics
Perception of headphone frequency response curves of equal loudness ISO 226-2009 from Monster Beats by Dr. Dre Studio
Channel
Center/Summary
From level 48 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,1, +17,8
From level 36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-10,2, +14,8
From level 24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-9,3, +11,7
From level 12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-8,3, +8,6
From level 0 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-7,4, +5,6
From level -12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-6,6, +5,7
From level -24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-5,8, +6,8
From level -36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-5,1, +7,9

*Center channel is received by data averaging between the left and right channels

Table's data are based on the results from the test stand HDM1



On-line comparison and selection services for Monster Beats by Dr. Dre Studio

Compare the sensitivity and impedance Monster Beats by Dr. Dre Studio versus other models.

The automatic selection of the optimal AMP models from Monster Beats by Dr. Dre Studio from the measured power parameters of the amplifying part and the measured parameters of the headphones for different purpose of use.





Измерения Monster Beats by Dr. Dre Studio проведены Романом Кузнецовым на программно-аппаратном комплексе RAA.

Тест Monster Beats by Dr. Dre Studio проведен как черного ящика, без учета стоимости и престижа. Это главный принцип измерений и разработки тестов в RAA.



Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com




Monster Beats by Dr. Dre Studio is available in reports and services. You are in a professional report.

Service and suite of tests

Information for all

Comparison of on-line graphs

Information for professionals

report for a pro

Comparison of on-line graphs






Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.