Measurement's report BGVP Zero test and graphs - Reference Audio Analyzer

News and Reviews Reports of measured products Comparison and selection About RAA

Login Password
You are logged in as guest
Setting Register Forgot your password?

Navigating through reports of BGVP Zero (Click to open)
BGVP Zero is available in reports and services. You are in a professional report.

Information for entry level users

Information for all

Versus of characteristics

Information for professionals
Comparison of on-line graphs


Quick jump to the schedules in this pro report: Zero

      Test report - general data of BGVP Zero headphone

      Frequency response, Impedance, Frequency response with standard AMPs


      Graphics setting view
      Frequency band, Hz:
      Range, dB:

      Perception of headphone frequency response curves of equal loudness ISO 226-2009


      General results
      General results BGVP Zero
      Channel
      Summary (Right + Left)
      Sensitivity average in band from 100 Hz to 10 kHz, dB/V
      131,3
      Impedance average in band from 40 Hz to 15 kHz, ohm
      16,1
      For 94,0 dB SPL need, VRMS
      0,014
      For 94,0 dB SPL need, mW
      0,011

      The table shows a most important technical characteristics of BGVP Zero

      *Center channel headphone is received by averaging between left and right channels



      Test conditions
      • Type of headphones: In-Ear or Tablet
      • Measurements were performed on the stand:
        • Solid simulator-bushing SIEC (emulation of auditory channel)

      

      Sensitivity of BGVP Zero headphone


      Graphics setting view
      Frequency band, Hz:
      Channel:




      Table of measured characteristics
      Sensitivity BGVP Zero
      Channel
      Left
      Right
      Sensitivity average in band from 100 Hz to 10 kHz, dB/V
      131,2
      131,4
      Sensitivity at 500 Hz at 1 V, dB
      134,2
      133,1
      Sensitivity at 500 Hz at 1 mW, dB
      116,4
      115,4
      Sensitivity at 1000 Hz at 1 V, dB
      129,8
      128,8
      Sensitivity at 1000 Hz at 1 mW, dB
      112,1
      111,1

      The sensitivity was calculated by data from the measuring stand SIEC


      Frequency response of BGVP Zero headphone


      Graphics setting view
      Frequency band, Hz:
      Range, dB:
      Channel:




      Table of measured characteristics
      Frequency response BGVP Zero
      Channel
      Left
      Right
      Variation in frequency response in band from 100 Hz to 10 kHz, dB
      -14,34, 5,37
      -13,47, 5,66


      The RMS variation between the right and left channels
      BGVP Zero from stand SIEC
      Deviation between channels in band 40 Hz to 15 kHz, dB
      0,6
      Deviation between channels in low-frequency range 40 Hz to 200Гц, дБ
      0,5
      Deviation between channels in mid-frequency range 200 Hz to 2 kHz, dB
      0,4
      Deviation between channels in hi-frequency range 2 kHz 15 kHz, dB
      0,9

      Impedance of BGVP Zero headphone


      Graphics setting view
      Frequency band, Hz:
      Channel:




      Table of measured characteristics
      Impedance BGVP Zero
      Channel
      Left
      Right
      Impedance average in band from 40 Hz to 15 kHz, ohm
      16,0
      16,2
      Resistance at 500 Hz, ohm
      16,8
      16,8
      Resistance at 1000 Hz, ohm
      16,8
      16,8
      The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
      14986,4
      14986,4
      The minimum value in band from 40 Hz to 15 kHz, ohm
      10,5
      11,1
      The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
      3978,6
      4189,6
      The maximum value in band from 40 Hz to 15 kHz, ohm
      16,8
      17,0

      Electric phase of BGVP Zero headphone


      Graphics setting view
      Frequency band, Hz:
      Range, degree:
      Channel:




      Table of measured characteristics
      Electric phase BGVP Zero
      Channel
      Left
      Right
      Average variation in phase response in band from 20 Hz to 20 kHz, degree
      -7,4
      -6,9
      The minimum value in band from 20 Hz to 20 kHz at frequency, Hz
      19072,9
      19741,4
      The minimum value in band from 20 Hz to 20 kHz, degree
      -36,3
      -34,5
      The maximum value in band from 20 Hz to 20 kHz at frequency, Hz
      122,7
      50,1
      The maximum value in band from 20 Hz to 20 kHz, degree
      0,3
      0,3

      Frequency response of BGVP Zero headphone when connected to amplifiers with constant output impedance


      Graphics setting view
      Frequency band, Hz:
      Range, dB:
      Channel:




      Table of measured characteristics
      Frequency response of headphone BGVP Zero with amplifier with a constant impedance
      Channel
      Left
      Right
      Variation in FR from AMP 0 ohm in band 100 Hz to 10 kHz, dB
      -14,34, +5,37
      -13,47, +5,66
      Variation in FR from AMP 10 ohm in band 100 Hz to 10 kHz, dB
      -14,78, +5,43
      -13,90, +5,71
      Variation in FR from AMP 20 ohm in band 100 Hz to 10 kHz, dB
      -14,98, +5,46
      -14,09, +5,73
      Variation in FR from AMP 50 ohm in band 100 Hz to 10 kHz, dB
      -15,21, +5,49
      -14,31, +5,75
      Variation in FR from AMP 100 ohm in band 100 Hz to 10 kHz, dB
      -15,32, +5,51
      -14,42, +5,76
      Variation in FR from AMP 300 ohm in band 100 Hz to 10 kHz, dB
      -15,42, +5,52
      -14,52, +5,77

      Deviation of frequency response of BGVP Zero headphone when connected to amplifiers with constant output impedance


      Graphics setting view
      Frequency band, Hz:
      Range, dB:
      Channel:




      Table of measured characteristics
      Variation in frequency response with amplifiers with constant output resistance from BGVP Zero
      Channel
      Summary (Right + Left)
      With amplifier impedance at 10 ohm in band 20 Hz to 20 kHz, dB
      2,8
      With amplifier impedance at 20 ohm in band 20 Hz to 20 kHz, dB
      3,8
      With amplifier impedance at 50 ohm in band 20 Hz to 20 kHz, dB
      4,9
      With amplifier impedance at 100 ohm in band 20 Hz to 20 kHz, dB
      5,4
      With amplifier impedance at 300 ohm in band 20 Hz to 20 kHz, dB
      5,8

      *Center channel is received by data averaging between the left and right channels


      Frequency response of BGVP Zero headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


      Graphics setting view
      Frequency band, Hz:
      Range, dB:
      Channel:




      Table of measured characteristics
      Frequency response with an amplifier with zero output resistance and raising of output resistance in low frequencies from BGVP Zero
      Channel
      Left
      Right
      Variation in frequency response in band from 100 Hz to 10 kHz, dB
      -14,17, 5,14
      -13,31, 5,15

      Deviation of frequency response of BGVP Zero headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


      Graphics setting view
      Frequency band, Hz:
      Range, dB:
      Channel:




      Table of measured characteristics
      Variance of frequency response BGVP Zero depending on the total output resistance of the amplifier with zero resistance and a rise of resistance at low frequencies
      Variance frequency response at the frequency 20 Hz, dB
      -8,2
      Variance frequency response at the frequency 40 Hz, dB
      -3,8
      Variance frequency response at the frequency 80 Hz, dB
      -1,5

      Perception of headphone frequency response curves of equal loudness ISO 226-2009 of BGVP Zero headphone


      Graphics setting view
      Channel:




      Table of measured characteristics
      Perception of headphone frequency response curves of equal loudness ISO 226-2009 from BGVP Zero
      Channel
      Summary (Right + Left)
      From level 48 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
      -16,4, +17,2
      From level 36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
      -15,8, +14,2
      From level 24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
      -15,1, +11,1
      From level 12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
      -14,5, +8,1
      From level 0 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
      -13,9, +5,4
      From level -12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
      -13,3, +5,3
      From level -24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
      -12,8, +6,4
      From level -36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
      -12,3, +7,5

      *Center channel is received by data averaging between the left and right channels


      Impulse response of BGVP Zero headphone


      Graphics setting view
      Time, ms:
      Channel:




      Impulse Response Envelope (ETC - Energy Time Curve) of BGVP Zero headphone


      Graphics setting view
      Time, ms:
      Range, dB:
      Channel:




      Step response of BGVP Zero headphone


      Graphics setting view
      Time, ms:
      Channel:




      

      QSD / Watterfall of BGVP Zero headphone


      Graphics setting view
      Frequency band, Hz:
      Channel:



      Delta QSD / Delta Watterfall of BGVP Zero headphone


      Graphics setting view
      Frequency band, Hz:
      Channel:



      


      On-line comparison and selection services for BGVP Zero

      Comparison the frequency response

      Impedance

      Electric phase

      Compare the frequency response of the bundles

      Comparison of basic characteristics: Sensitivity, Impedance

      Determination of the required voltage level from a headphone amplifier for Zero and comparison with other models A additional analytics of compatibility with specific amplifiers

      Comparing changes in frequency and sound pressure as a function of the applied voltage and a impedance of an amplifier

      Headphone square wave comparison at the required frequency

      The automatic selection of the optimal AMP models from Zero




      More detailed

      Measurements of BGVP Zero were carried out by Roman Kuznetsov on the hardware-software complex RAA.

      The BGVP Zero test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

      I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a source amplifier and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




      Kuznetsov Roman
      Founder of RAA



      Known by the nickname romanrex
      Аuthor of articles iXBT.com



      Information for Authors. You can freely use the graphics in your articles with a link to us.




      BGVP Zero is available in reports and services. You are in a professional report.

      Information for entry level users

      Information for all

      Versus of characteristics

      Information for professionals
      Comparison of on-line graphs




      Quick jump to the schedule in this report:






      Original text in Russian page. Translation page is not yet ready

      You can help with translation via the: facebook and feedback.




      Comments

      No comments to BGVP Zero
      Commentary view:





      Want to leave a comment or ask a question? Register now or log in