Measurement's report Beyerdynamic DT 880 Pro Default test and graphs - Reference Audio Analyzer

Beyerdynamic DT 880 Pro is available in reports and services. You are in a professional report.

Service and suite of tests

Information for entry level users

report for a newbie
(Headphones)

General recommendations

The automatic selection of the optimal AMP models

Information for all

Comparison of on-line graphs


Reports / Beyerdynamic / DT 880 Pro / Default / report for a pro

Conducted technical work on updating the report. Charts may temporarily not be displayed at the time of the work.

Beyerdynamic DT 880 Pro: Default (report for a pro)



Test report - general data of Beyerdynamic DT 880 Pro Default headphone

Frequency response, Impedance, Frequency response with standard AMPs


Graphics setting view
Frequency band, Hz:
Range, dB:

Perception of headphone frequency response curves of equal loudness ISO 226-2009


General results
General results Beyerdynamic DT 880 Pro Default
Channel
Center/Summary
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
101,5
Impedance average in band from 40 Hz to 15 kHz, ohm
252,9
For 94,0 dB SPL need, VRMS
0,420
For 94,0 dB SPL need, mW
0,699

The table shows a most important technical characteristics of Beyerdynamic DT 880 Pro Default

*Center channel headphone is received by averaging between left and right channels



Test conditions
  • Type of headphones: Over-ear
  • Measurements were performed on the stand:
    • with on the simulator of human head with ears HDM-X with natural acoustic damping



Sensitivity of Beyerdynamic DT 880 Pro Default headphone


Graphics setting view
Frequency band, Hz:
Channel:




Table of measured characteristics
Sensitivity Beyerdynamic DT 880 Pro Default
Channel
Left
Right
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
100,8
102,2
Sensitivity at 500 Hz at 1 V, dB
100,1
101,3
Sensitivity at 500 Hz at 1 mW, dB
94,0
95,1
Sensitivity at 1000 Hz at 1 V, dB
99,1
100,4
Sensitivity at 1000 Hz at 1 mW, dB
92,8
94,1

The sensitivity was calculated by data from the measuring stand HDM-X


Frequency response of Beyerdynamic DT 880 Pro Default headphone


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:




Table of measured characteristics
Frequency response Beyerdynamic DT 880 Pro Default
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-2,43, 8,97
-2,51, 9,68

Impedance of Beyerdynamic DT 880 Pro Default headphone


Graphics setting view
Frequency band, Hz:
Channel:




Table of measured characteristics
Impedance Beyerdynamic DT 880 Pro Default
Channel
Left
Right
Impedance average in band from 40 Hz to 15 kHz, ohm
252,7
253,2
Resistance at 500 Hz, ohm
244,4
244,2
Resistance at 1000 Hz, ohm
234,6
234,4
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
1749,1
1558,5
The minimum value in band from 40 Hz to 15 kHz, ohm
232,2
232,5
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
70,1
54,9
The maximum value in band from 40 Hz to 15 kHz, ohm
287,7
288,1

Electric phase of Beyerdynamic DT 880 Pro Default headphone


Graphics setting view
Frequency band, Hz:
Range, degree:
Channel:




Table of measured characteristics
Electric phase Beyerdynamic DT 880 Pro Default
Channel
Left
Right
Average variation in phase response in band from 20 Hz to 20 kHz, degree
1,1
1,1
The minimum value in band from 20 Hz to 20 kHz at frequency, Hz
249,6
280,1
The minimum value in band from 20 Hz to 20 kHz, degree
-5,6
-5,8
The maximum value in band from 20 Hz to 20 kHz at frequency, Hz
19730,3
19730,3
The maximum value in band from 20 Hz to 20 kHz, degree
14,4
14,0

Frequency response of Beyerdynamic DT 880 Pro Default headphone when connected to amplifiers with constant output impedance


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:




Table of measured characteristics
Frequency response of headphone Beyerdynamic DT 880 Pro Default with amplifier with a constant impedance
Channel
Left
Right
Variation in FR from AMP 0 ohm in band 100 Hz to 10 kHz, dB
-2,43, +8,97
-2,51, +9,68
Variation in FR from AMP 10 ohm in band 100 Hz to 10 kHz, dB
-2,45, +8,97
-2,53, +9,68
Variation in FR from AMP 20 ohm in band 100 Hz to 10 kHz, dB
-2,46, +8,96
-2,55, +9,67
Variation in FR from AMP 50 ohm in band 100 Hz to 10 kHz, dB
-2,51, +8,95
-2,60, +9,66
Variation in FR from AMP 100 ohm in band 100 Hz to 10 kHz, dB
-2,57, +8,93
-2,65, +9,64
Variation in FR from AMP 300 ohm in band 100 Hz to 10 kHz, dB
-2,69, +8,89
-2,78, +9,60

Deviation of frequency response of Beyerdynamic DT 880 Pro Default headphone when connected to amplifiers with constant output impedance


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:




Table of measured characteristics
Variation in frequency response with amplifiers with constant output resistance from Beyerdynamic DT 880 Pro Default
Channel
Center/Summary
With amplifier impedance at 10 ohm in band 20 Hz to 20 kHz, dB
0,1
With amplifier impedance at 20 ohm in band 20 Hz to 20 kHz, dB
0,1
With amplifier impedance at 50 ohm in band 20 Hz to 20 kHz, dB
0,3
With amplifier impedance at 100 ohm in band 20 Hz to 20 kHz, dB
0,5
With amplifier impedance at 300 ohm in band 20 Hz to 20 kHz, dB
1,0

*Center channel is received by data averaging between the left and right channels


Frequency response of Beyerdynamic DT 880 Pro Default headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:




Table of measured characteristics
Frequency response with an amplifier with zero output resistance and raising of output resistance in low frequencies from Beyerdynamic DT 880 Pro Default
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-2,42, 8,98
-2,50, 9,69

Deviation of frequency response of Beyerdynamic DT 880 Pro Default headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:




Table of measured characteristics
Variance of frequency response Beyerdynamic DT 880 Pro Default depending on the total output resistance of the amplifier with zero resistance and a rise of resistance at low frequencies
Variance frequency response at the frequency 20 Hz, dB
-0,8
Variance frequency response at the frequency 40 Hz, dB
-0,3
Variance frequency response at the frequency 80 Hz, dB
-0,1

Perception of headphone frequency response curves of equal loudness ISO 226-2009 of Beyerdynamic DT 880 Pro Default headphone


Graphics setting view
Channel:




Table of measured characteristics
Perception of headphone frequency response curves of equal loudness ISO 226-2009 from Beyerdynamic DT 880 Pro Default
Channel
Center/Summary
From level 48 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-6,8, +12,6
From level 36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-5,7, +9,6
From level 24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-4,6, +7,3
From level 12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-3,6, +8,3
From level 0 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-2,5, +9,4
From level -12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-2,6, +10,4
From level -24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-5,5, +11,3
From level -36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-8,2, +12,2

*Center channel is received by data averaging between the left and right channels


Impulse response of Beyerdynamic DT 880 Pro Default headphone


Graphics setting view
Time, ms:
Channel:



Impulse Response Envelope (ETC - Energy Time Curve) of Beyerdynamic DT 880 Pro Default headphone


Graphics setting view
Time, ms:
Range, dB:
Channel:



Step response of Beyerdynamic DT 880 Pro Default headphone


Graphics setting view
Time, ms:
Channel:





Square wave of Beyerdynamic DT 880 Pro Default headphone

Ваш браузер не поддерживает Canvas