Measurement's report Beyerdynamic DT 60 PRO SC test and graphs - Reference Audio Analyzer
Beyerdynamic DT 60 PRO SC



Reports / Beyerdynamic / DT 60 PRO SC / report for a pro

Conducted technical work on updating the report. Charts may temporarily not be displayed at the time of the work.

Beyerdynamic DT 60 PRO SC (report for a pro)



Test report - general data of Beyerdynamic DT 60 PRO SC headphone

Frequency response, Impedance, Frequency response with standard AMPs


Graphics setting view
Range, dB:

Perception of headphone frequency response curves of equal loudness ISO 226-2009


General results
General results Beyerdynamic DT 60 PRO SC
Channel
Left
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
129,0
Impedance average in band from 40 Hz to 15 kHz, ohm
17,2
For 94,0 dB SPL need, VRMS
0,018
For 94,0 dB SPL need, mW
0,018

The table shows a most important technical characteristics of Beyerdynamic DT 60 PRO SC



Test conditions
  • Type of headphones: In-Ear or Tablet
  • Measurements were performed on the stand:
    • with on the simulator of human head with ears HDM1
  • Headphone's impedance has been tested only with Left channel



Sensitivity of Beyerdynamic DT 60 PRO SC headphone





Table of measured characteristics
Sensitivity Beyerdynamic DT 60 PRO SC
Channel
Left
Right
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
129,0
0,0
Sensitivity at 500 Hz at 1 V, dB
128,9
0,0
Sensitivity at 500 Hz at 1 mW, dB
111,3
-бесконечность
Sensitivity at 1000 Hz at 1 V, dB
127,0
0,0
Sensitivity at 1000 Hz at 1 mW, dB
109,3
-бесконечность

The sensitivity was calculated by data from the measuring stand HDM1


Frequency response of Beyerdynamic DT 60 PRO SC headphone


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response Beyerdynamic DT 60 PRO SC
Channel
Left
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-13,30, 6,19

Impedance of Beyerdynamic DT 60 PRO SC headphone





Table of measured characteristics
Impedance Beyerdynamic DT 60 PRO SC
Channel
Left
Impedance average in band from 40 Hz to 15 kHz, ohm
17,2
Resistance at 500 Hz, ohm
17,1
Resistance at 1000 Hz, ohm
17,1
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
40,6
The minimum value in band from 40 Hz to 15 kHz, ohm
17,1
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
4161,9
The maximum value in band from 40 Hz to 15 kHz, ohm
17,7

Electric phase of Beyerdynamic DT 60 PRO SC headphone


Graphics setting view
Range, degree:




Table of measured characteristics
Electric phase Beyerdynamic DT 60 PRO SC
Channel
Left
Average variation in phase response in band from 20 Hz to 20 kHz, degree
1,8
The minimum value in band from 20 Hz to 20 kHz at frequency, Hz
79,6
The minimum value in band from 20 Hz to 20 kHz, degree
0,2
The maximum value in band from 20 Hz to 20 kHz at frequency, Hz
19682,2
The maximum value in band from 20 Hz to 20 kHz, degree
11,5

Frequency response of Beyerdynamic DT 60 PRO SC headphone when connected to amplifiers with constant output impedance


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response of headphone Beyerdynamic DT 60 PRO SC with the concurrence of the amplifier with a constant impedance
Channel
Left
Variation in FR from AMP 0 ohm in band 100 Hz to 10 kHz, dB
-13,30, +6,19
Variation in FR from AMP 10 ohm in band 100 Hz to 10 kHz, dB
-13,31, +6,24
Variation in FR from AMP 20 ohm in band 100 Hz to 10 kHz, dB
-13,32, +6,26
Variation in FR from AMP 50 ohm in band 100 Hz to 10 kHz, dB
-13,32, +6,29
Variation in FR from AMP 100 ohm in band 100 Hz to 10 kHz, dB
-13,33, +6,31
Variation in FR from AMP 300 ohm in band 100 Hz to 10 kHz, dB
-13,33, +6,32

The impedance was tested only Left channel data variance for Right channel generated by the data Left channel



Deviation of frequency response of Beyerdynamic DT 60 PRO SC headphone when connected to amplifiers with constant output impedance


Graphics setting view
Range, dB:




Table of measured characteristics
Variation in frequency response with amplifiers with constant output resistance from Beyerdynamic DT 60 PRO SC
Channel
Left
With amplifier impedance at 10 ohm in band 20 Hz to 20 kHz, dB
0,1
With amplifier impedance at 20 ohm in band 20 Hz to 20 kHz, dB
0,2
With amplifier impedance at 50 ohm in band 20 Hz to 20 kHz, dB
0,3
With amplifier impedance at 100 ohm in band 20 Hz to 20 kHz, dB
0,3
With amplifier impedance at 300 ohm in band 20 Hz to 20 kHz, dB
0,3

The impedance was tested only Left channel data variance for Right channel generated by the data Left channel



Frequency response of Beyerdynamic DT 60 PRO SC headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response with an amplifier with zero output resistance and raising of output resistance in low frequencies from Beyerdynamic DT 60 PRO SC
Channel
Left
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-13,30, 6,19

The impedance was tested only Left channel data variance for Right channel generated by the data Left channel



Deviation of frequency response of Beyerdynamic DT 60 PRO SC headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


Graphics setting view
Range, dB:




Table of measured characteristics
Variance of frequency response Beyerdynamic DT 60 PRO SC depending on the total output resistance of the amplifier with zero resistance and a rise of resistance at low frequencies
Variance frequency response at the frequency 20 Hz, dB
-7,9
Variance frequency response at the frequency 40 Hz, dB
-3,7
Variance frequency response at the frequency 80 Hz, dB
-1,4

The impedance was tested only Left channel data variance for Right channel generated by the data Left channel



Perception of headphone frequency response curves of equal loudness ISO 226-2009 of Beyerdynamic DT 60 PRO SC headphone





Table of measured characteristics
Perception of headphone frequency response curves of equal loudness ISO 226-2009 from Beyerdynamic DT 60 PRO SC
Channel
Left
From level 48 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-15,3, +16,0
From level 36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-14,8, +13,0
From level 24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-14,2, +9,9
From level 12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-13,7, +6,9
From level 0 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-13,3, +6,2
From level -12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-12,9, +7,3
From level -24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-12,6, +8,3
From level -36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-12,3, +9,4


On-line comparison and selection services for Beyerdynamic DT 60 PRO SC

Comparison the frequency response.
The Beyerdynamic DT 60 PRO SC was tested for a long time at the stands of the last generation and does not participate in comparison. If possible, we will re-test the Beyerdynamic DT 60 PRO SC on modern stands.
Compare the frequency response of a bundle of headphones and amplifiers.
The Beyerdynamic DT 60 PRO SC was tested for a long time at the stands of the last generation and does not participate in comparison. If possible, we will re-test the Beyerdynamic DT 60 PRO SC on modern stands.

Compare the sensitivity and impedance Beyerdynamic DT 60 PRO SC versus other models.

The automatic selection of the optimal AMP models from Beyerdynamic DT 60 PRO SC from the measured power parameters of the amplifying part and the measured parameters of the headphones for different purpose of use.

Сравнение АЧХ и звукового давления Beyerdynamic DT 60 PRO SC в зависимости от подаваемого напряжения и импеданса усилителя.


Измерения Beyerdynamic DT 60 PRO SC проведены Романом Кузнецовым на программно-аппаратном комплексе RAA.

Тест Beyerdynamic DT 60 PRO SC проведен как черного ящика, без учета стоимости и престижа. Это главный принцип измерений и разработки тестов в RAA.



Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com



Last news




Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.


Share report

If you notice a typo or other inaccuracy, then select it and press Ctrl+Enter. This will accelerate the process of improving the reports.

The original language of the report in Russian. If the text in the report is unclear, use online translators Russian-language report (and help with the correct translation into English)

Glossary: RUS, ENG. To display on page ID need to enable debug mode.

Debug mode: Switch ON





Follow