Measurement's report Audio-Technica ATH-AD1000PRM Premium test and graphs - Reference Audio Analyzer
Audio-Technica ATH-AD1000PRM Premium



Reports / Audio-Technica / ATH-AD1000PRM Premium / report for a pro

Conducted technical work on updating the report. Charts may temporarily not be displayed at the time of the work.

Audio-Technica ATH-AD1000PRM Premium (report for a pro)



Test report - general data of Audio-Technica ATH-AD1000PRM Premium headphone

Frequency response, Impedance, Frequency response with standard AMPs


Graphics setting view
Range, dB:

Perception of headphone frequency response curves of equal loudness ISO 226-2009


General results
General results Audio-Technica ATH-AD1000PRM Premium
Channel
Center/Summary
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
117,1
Impedance average in band from 40 Hz to 15 kHz, ohm
41,9
For 94,0 dB SPL need, VRMS
0,070
For 94,0 dB SPL need, mW
0,117

The table shows a most important technical characteristics of Audio-Technica ATH-AD1000PRM Premium

*Center channel headphone is received by averaging between left and right channels

*impedance value in the table for Left channel



Test conditions
  • Type of headphones: Over-ear
  • Measurements were performed on the stand:
    • with on the simulator of human head with ears HDM1
  • Headphone's impedance has been tested only with Left channel



Sensitivity of Audio-Technica ATH-AD1000PRM Premium headphone


Graphics setting view
Channel:




Table of measured characteristics
Sensitivity Audio-Technica ATH-AD1000PRM Premium
Channel
Left
Right
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
117,9
116,2
Sensitivity at 500 Hz at 1 V, dB
117,0
114,6
Sensitivity at 500 Hz at 1 mW, dB
103,0
-бесконечность
Sensitivity at 1000 Hz at 1 V, dB
117,6
114,8
Sensitivity at 1000 Hz at 1 mW, dB
103,5
-бесконечность

The sensitivity was calculated by data from the measuring stand HDM1


Frequency response of Audio-Technica ATH-AD1000PRM Premium headphone


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response Audio-Technica ATH-AD1000PRM Premium
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-6,52, 9,00
-2,80, 8,88

Impedance of Audio-Technica ATH-AD1000PRM Premium headphone





Table of measured characteristics
Impedance Audio-Technica ATH-AD1000PRM Premium
Channel
Left
Impedance average in band from 40 Hz to 15 kHz, ohm
41,9
Resistance at 500 Hz, ohm
40,6
Resistance at 1000 Hz, ohm
39,1
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
5733,5
The minimum value in band from 40 Hz to 15 kHz, ohm
38,9
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
113,3
The maximum value in band from 40 Hz to 15 kHz, ohm
48,1

Electric phase of Audio-Technica ATH-AD1000PRM Premium headphone


Graphics setting view
Range, degree:




Table of measured characteristics
Electric phase Audio-Technica ATH-AD1000PRM Premium
Channel
Left
Average variation in phase response in band from 20 Hz to 20 kHz, degree
0,6
The minimum value in band from 20 Hz to 20 kHz at frequency, Hz
264,7
The minimum value in band from 20 Hz to 20 kHz, degree
-6,2
The maximum value in band from 20 Hz to 20 kHz at frequency, Hz
19682,2
The maximum value in band from 20 Hz to 20 kHz, degree
8,5

Frequency response of Audio-Technica ATH-AD1000PRM Premium headphone when connected to amplifiers with constant output impedance


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of headphone Audio-Technica ATH-AD1000PRM Premium with amplifier with a constant impedance
Channel
Left
Right
Variation in FR from AMP 0 ohm in band 100 Hz to 10 kHz, dB
-6,52, +9,00
-2,80, +8,88
Variation in FR from AMP 10 ohm in band 100 Hz to 10 kHz, dB
-6,62, +8,98
-2,55, +8,87
Variation in FR from AMP 20 ohm in band 100 Hz to 10 kHz, dB
-6,68, +8,96
-2,38, +8,87
Variation in FR from AMP 50 ohm in band 100 Hz to 10 kHz, dB
-6,79, +8,95
-2,09, +8,87
Variation in FR from AMP 100 ohm in band 100 Hz to 10 kHz, dB
-6,86, +8,94
-2,08, +8,88
Variation in FR from AMP 300 ohm in band 100 Hz to 10 kHz, dB
-6,95, +8,93
-2,16, +8,89

The impedance was tested only Left channel data variance for Right channel generated by the data Left channel



Deviation of frequency response of Audio-Technica ATH-AD1000PRM Premium headphone when connected to amplifiers with constant output impedance


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Variation in frequency response with amplifiers with constant output resistance from Audio-Technica ATH-AD1000PRM Premium
Channel
Center/Summary
With amplifier impedance at 10 ohm in band 20 Hz to 20 kHz, dB
0,3
With amplifier impedance at 20 ohm in band 20 Hz to 20 kHz, dB
0,6
With amplifier impedance at 50 ohm in band 20 Hz to 20 kHz, dB
1,0
With amplifier impedance at 100 ohm in band 20 Hz to 20 kHz, dB
1,3
With amplifier impedance at 300 ohm in band 20 Hz to 20 kHz, dB
1,6

*Center channel is received by data averaging between the left and right channels

The impedance was tested only Left channel data variance for Right channel generated by the data Left channel



Frequency response of Audio-Technica ATH-AD1000PRM Premium headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response with an amplifier with zero output resistance and raising of output resistance in low frequencies from Audio-Technica ATH-AD1000PRM Premium
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-6,46, 9,06
-3,14, 8,94

The impedance was tested only Left channel data variance for Right channel generated by the data Left channel



Deviation of frequency response of Audio-Technica ATH-AD1000PRM Premium headphone when connected to an amplifier with zero output impedance and raising of output impedanse in low frequencies


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Variance of frequency response Audio-Technica ATH-AD1000PRM Premium depending on the total output resistance of the amplifier with zero resistance and a rise of resistance at low frequencies
Variance frequency response at the frequency 20 Hz, dB
-4,2
Variance frequency response at the frequency 40 Hz, dB
-1,6
Variance frequency response at the frequency 80 Hz, dB
-0,6

The impedance was tested only Left channel data variance for Right channel generated by the data Left channel



Perception of headphone frequency response curves of equal loudness ISO 226-2009 of Audio-Technica ATH-AD1000PRM Premium headphone


Graphics setting view
Channel:




Table of measured characteristics
Perception of headphone frequency response curves of equal loudness ISO 226-2009 from Audio-Technica ATH-AD1000PRM Premium
Channel
Center/Summary
From level 48 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-7,4, +9,0
From level 36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-6,5, +5,9
From level 24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-5,7, +6,6
From level 12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-4,9, +7,8
From level 0 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-4,1, +8,9
From level -12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-6,2, +10,0
From level -24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-9,1, +11,2
From level -36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,8, +12,3

*Center channel is received by data averaging between the left and right channels



On-line comparison and selection services for Audio-Technica ATH-AD1000PRM Premium

Comparison the frequency response.
The Audio-Technica ATH-AD1000PRM Premium was tested for a long time at the stands of the last generation and does not participate in comparison. If possible, we will re-test the Audio-Technica ATH-AD1000PRM Premium on modern stands.
Compare the frequency response of a bundle of headphones and amplifiers.
The Audio-Technica ATH-AD1000PRM Premium was tested for a long time at the stands of the last generation and does not participate in comparison. If possible, we will re-test the Audio-Technica ATH-AD1000PRM Premium on modern stands.

Compare the sensitivity and impedance Audio-Technica ATH-AD1000PRM Premium versus other models.

The automatic selection of the optimal AMP models from Audio-Technica ATH-AD1000PRM Premium from the measured power parameters of the amplifying part and the measured parameters of the headphones for different purpose of use.

Сравнение АЧХ и звукового давления Audio-Technica ATH-AD1000PRM Premium в зависимости от подаваемого напряжения и импеданса усилителя.


Измерения Audio-Technica ATH-AD1000PRM Premium проведены Романом Кузнецовым на программно-аппаратном комплексе RAA.

Тест Audio-Technica ATH-AD1000PRM Premium проведен как черного ящика, без учета стоимости и престижа. Это главный принцип измерений и разработки тестов в RAA.



Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com



Last news




Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.


Share report

If you notice a typo or other inaccuracy, then select it and press Ctrl+Enter. This will accelerate the process of improving the reports.

The original language of the report in Russian. If the text in the report is unclear, use online translators Russian-language report (and help with the correct translation into English)

Glossary: RUS, ENG. To display on page ID need to enable debug mode.

Debug mode: Switch ON





Follow