Measurement's report Topping D50s MODE 2 test and graphs - Reference Audio Analyzer

Reports / Topping / D50s / MODE 2 / A set of device tests as a DAC line output - report for a pro

Test report Topping D50s: MODE 2 (report for a pro)






Test report - general data of Topping D50s MODE 2 as Line Out mode

Frequency response


Graphics setting view
Frequency band, Hz:
Range, dB:
Type test:

Spectrum of Total Harmonic Distortion (THD)

Spectrum of Jitter


Spectrum of Multitone Distortion



General results
General results Topping D50s MODE 2
Channel
Summary (Right + Left)
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,04, 0,02
Max voltage output at 0 dBFS, VRMS
1,91
Max voltage output at 0 dBFS, dBV
5,63
Max voltage output at 0 dBFS, dBu
7,85
Harmonic distortion at 0,0 dBFS @ 1 kHz, dB
-112,8
Total harmonic distortion at 0,0 dBFS @ 1 kHz, %
0,000229
Harmonic distortion at -3,0 dBFS @ 1 kHz, dB
-111,7
Total harmonic distortion at -3,0 dBFS @ 1 kHz, %
0,000260

The table shows a most important technical characteristics of Topping D50s MODE 2

*Center channel headphone is received by averaging between left and right channels



Test conditions



Frequency response of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:
Type test:




Table of measured characteristics
Frequency response Topping D50s MODE 2
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,04, 0,02
-0,04, 0,02

Crosstalk of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Crosstalk Topping D50s MODE 2
Crosstalk at the frequency 100 Hz, dB
-114,9
Crosstalk at the frequency 1000 Hz, dB
-114,3
Crosstalk at the frequency 10000 Hz, dB
-108,0

Crosstalk Phase of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:



THD vs output voltage of line out of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:
Type test:




Table of measured characteristics
THD vs output voltage of line out Topping D50s MODE 2
Max voltage output at 0 dBFS, VRMS
1,91
Max voltage output at 0 dBFS, dBV
5,63
Max voltage output at 0 dBFS, dBu
7,85


Total Harmonic Distortion vs Level (dBFS) of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:
Type test:



Impulse response of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Time, ms:
Channel:




Impulse Response Envelope (ETC - Energy Time Curve) of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Time, ms:
Range, dB:
Channel:




Step response of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Time, ms:
Channel:






Aliasing of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:
Type test:



Checking for correctness of reproduction signals depth more than 16-bit of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:
Type test:



Waveforms of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Time, ms:
Channel:
Type test:



Spectrums of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Frequency band, Hz:
Channel:
Type test:



Spectra of high resolution

Noise floor spectrum of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Scale:



Spectrum of Total Harmonic Distortion (THD) of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Level, dBFS:
Scale:




Table of measured characteristics
Harmonic distortion
Topping D50s MODE 2
Harmonic distortion at 0,0 dBFS @ 1 kHz, dB
-112,8
Total harmonic distortion at 0,0 dBFS @ 1 kHz, %
0,000229
Harmonic distortion at -3,0 dBFS @ 1 kHz, dB
-111,7
Total harmonic distortion at -3,0 dBFS @ 1 kHz, %
0,000260




Table of measured characteristics
The levels of harmonics when applying signal 1 kHz 0 dBFS
Topping D50s MODE 2
Harmonic, number
1
2
3
4
5
6
7
8
9
10
The level of harmonics, dB
0,0
-114,7
-120,1
-126,9
-125,7
-136,2
-131,6
-141,9
-129,7
-156,7
Harmonic, number
11
12
13
14
15
16
17
18
19
20
The level of harmonics, dB
-131,6
-146,7
-141,7
-140,0
-152,3
-138,9
-138,3
-143,6
-132,9
-148,2


The levels of harmonics when applying signal 1 kHz -3 dBFS
Topping D50s MODE 2
Harmonic, number
1
2
3
4
5
6
7
8
9
10
The level of harmonics, dB
-3,0
-118,5
-123,5
-133,4
-124,7
-151,2
-124,4
-148,0
-129,5
-160,2
Harmonic, number
11
12
13
14
15
16
17
18
19
20
The level of harmonics, dB
-130,6
-147,8
-128,5
-148,0
-128,8
-144,0
-127,9
-143,6
-128,8
-139,3
The data in the tables correspond to by average value of left and right channels

Spectrum of Dynamic Range (-60 dBFS) of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Scale:



Sine low ammplitude spectrum -90 dBFS of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Scale:



Spectrum of Intermodulation Distortion (IMD) - SMPTE of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:
Level, dBFS:
Scale:



Spectrum of Intermodulation Distortion (IMD) - CCIF of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Level, dBFS:



Spectrum of Multitone Distortion of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Level, dBFS:
Type test:



Spectrum of Noise Distortion of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Level, dBFS:



Spectrum of Jitter of Topping D50s MODE 2 (High resolution graph) as Line Out mode


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:
Type test:




Table of measured characteristics
The accuracy of the playback speed Topping D50s MODE 2
Fundamental tone 11025 Hz, Hz
11025,0000
Variance from 11025 Hz, Hz
0,0000

Spectra vs Amplitude

Total Harmonic Distortion vs Level (dBFS) of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:
Level, dBFS:



Spectrum of IMD SMPTE vs Level (dBFS) of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBFS:



Spectrum of IMD CCIF vs Level (dBFS) of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:
Level, dBFS:



Spectrum of Multitone Distortion vs Level (dBFS) of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:
Level, dBFS:
Type test:



Spectrum of Noise Distortion vs Level (dBFS) of Topping D50s MODE 2 as Line Out mode


Graphics setting view
Channel:
Level, dBFS:



Close

Measurements of Topping D50s MODE 2 were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The Topping D50s MODE 2 test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com



Information for Authors. You can freely use the graphics in your articles with a link to us.



Topping D50s is available in reports and services. You are in a professional report.

Information for professionals

reports for a pro(DAC Line Out)





Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.

 

Comments

No comments to Topping D50s
Commentary view:





Want to leave a comment or ask a question? Register now or log in