Measurement's report Aune T1 test and graphs - Reference Audio Analyzer

Aune T1 is available in reports and services. You are in a professional report.

Service and suite of tests

Information for entry level users

report for a newbie
(Headphone amplifier)

General recommendations

The automatic selection of the optimal AMP models

Information for all

Comparison of on-line graphs

Information for professionals

report for a pro
(Headphone amplifier)

(DAC Line Out)

Comparison of on-line graphs


Reports / Aune / T1 / DAC Line Out / report for a pro

Test report Aune T1 (report for a pro)






Test report - general data of Aune T1 as Line Out mode

Frequency response


Graphics setting view
Frequency band, Hz:
Range, dB:

Spectrum of Total Harmonic Distortion (THD)

Spectrum of Jitter



General results
General results Aune T1
Channel
Center/Summary
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,63, 0,03
Max voltage output at 0 dBFS, VRMS
1,59
Max voltage output at 0 dBFS, dBV
4,05
Max voltage output at 0 dBFS, dBu
6,27
Harmonic distortion at 0,0 dBFS @ 1 kHz, dB
-41,1
Total harmonic distortion at 0,0 dBFS @ 1 kHz, %
0,881772
Harmonic distortion at -3,0 dBFS @ 1 kHz, dB
-44,7
Total harmonic distortion at -3,0 dBFS @ 1 kHz, %
0,583981

The table shows a most important technical characteristics of Aune T1

*Center channel headphone is received by averaging between left and right channels



Test conditions



Frequency response of Aune T1 as Line Out mode


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:




Table of measured characteristics
Frequency response Aune T1
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,65, 0,04
-0,60, 0,03

THD vs output voltage of line out of Aune T1 as Line Out mode


Graphics setting view
Channel:
Type test:




Table of measured characteristics
THD vs output voltage of line out Aune T1
Max voltage output at 0 dBFS, VRMS
1,59
Max voltage output at 0 dBFS, dBV
4,05
Max voltage output at 0 dBFS, dBu
6,27


Total Harmonic Distortion vs Level (dBFS) of Aune T1 as Line Out mode


Graphics setting view
Channel:
Type test:



Impulse response of Aune T1 as Line Out mode


Graphics setting view
Time, ms:
Channel:



Impulse Response Envelope (ETC - Energy Time Curve) of Aune T1 as Line Out mode


Graphics setting view
Time, ms:
Range, dB:
Channel:



Step response of Aune T1 as Line Out mode


Graphics setting view
Time, ms:
Channel:





Spectra of high resolution

Noise floor spectrum of Aune T1 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Scale:



Spectrum of Total Harmonic Distortion (THD) of Aune T1 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Level, dBFS:
Scale:




Table of measured characteristics
Harmonic distortion
Aune T1
Harmonic distortion at 0,0 dBFS @ 1 kHz, dB
-41,1
Total harmonic distortion at 0,0 dBFS @ 1 kHz, %
0,881772
Harmonic distortion at -3,0 dBFS @ 1 kHz, dB
-44,7
Total harmonic distortion at -3,0 dBFS @ 1 kHz, %
0,583981




Table of measured characteristics
The levels of harmonics when applying signal 1 kHz 0 dBFS
Aune T1
Harmonic, number
1
2
3
4
5
6
7
8
9
10
The level of harmonics, dB
0,0
-41,2
-57,5
-74,0
-86,4
-105,6
-108,7
-122,3
-120,1
-144,6
Harmonic, number
11
12
13
14
15
16
17
18
19
20
The level of harmonics, dB
-134,6
-145,0
-134,8
-140,9
-143,5
-143,0
-142,7
-139,7
-142,2
-139,8


The levels of harmonics when applying signal 1 kHz -3 dBFS
Aune T1
Harmonic, number
1
2
3
4
5
6
7
8
9
10
The level of harmonics, dB
-3,0
-47,7
-67,4
-87,0
-102,8
-121,2
-121,9
-141,5
-132,6
-156,0
Harmonic, number
11
12
13
14
15
16
17
18
19
20
The level of harmonics, dB
-142,9
-143,1
-138,2
-138,2
-143,0
-145,1
-143,6
-138,5
-141,3
-141,2
The data in the tables correspond to by average value of left and right channels

Spectrum of Dynamic Range (-60 dBFS) of Aune T1 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Scale:



Sine low ammplitude spectrum -90 dBFS of Aune T1 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Scale:



Spectrum of Intermodulation Distortion (IMD) - SMPTE of Aune T1 (High resolution graph) as Line Out mode


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:
Level, dBFS:
Scale:



Spectrum of Intermodulation Distortion (IMD) - CCIF of Aune T1 (High resolution graph) as Line Out mode


Graphics setting view
Range, dB:
Channel:
Level, dBFS:



Spectrum of Jitter of Aune T1 (High resolution graph) as Line Out mode


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:
Type test:




Table of measured characteristics
The accuracy of the playback speed Aune T1
Fundamental tone 11025 Hz, Hz
11025,1682
Variance from 11025 Hz, Hz
0,1682

Spectra vs Amplitude

Total Harmonic Distortion vs Level (dBFS) of Aune T1 as Line Out mode


Graphics setting view
Channel:
Level, dBFS:



Close

Measurements of Aune T1 were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The Aune T1 test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.



Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com




Aune T1 is available in reports and services. You are in a professional report.

Service and suite of tests

Information for entry level users

report for a newbie
(Headphone amplifier)

General recommendations

The automatic selection of the optimal AMP models

Information for all

Comparison of on-line graphs

Information for professionals

report for a pro
(Headphone amplifier)

(DAC Line Out)

Comparison of on-line graphs






Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.


Comments

No comments to Aune T1
Commentary view:





Want to leave a comment or ask a question? Register now or log in