Measurement's report OPPO HA-1 Unbalance test and graphs - Reference Audio Analyzer

OPPO HA-1 is available in reports and services. You are in a professional report.



Information for entry level users

reports for a newbie (Headphone amplifier)

Reports / OPPO / HA-1 / Unbalance / Amplifier path / report for a pro

Test report OPPO HA-1: Unbalance (report for a pro)






Test report - general data of OPPO HA-1 Unbalance as AMP mode

Frequency response, Impedance and Frequency response with standard headphones


Graphics setting view
Range, dB:

The maximum level of voltage from the musical power


General results
General results
OPPO HA-1 Unbalance
Channel
Center/Summary
Average variation in FR in the band 40 Hz to 15 kHz, dB
-0,05, 0,10
Average value of impedance band in 40 Hz to 15 kHz, ohm
0,4
Max voltage output
VRMS
dBV
Pure or equal class A
6,83
16,69
Optimal or equal class AB
6,83
16,69
Hard or equal class B
6,83
16,69
Max, before clipping
6,83
16,69
Maximum current output at loaded
ohm
mA
Pure or equal class A
15,8
111,87
Optimal or equal class AB
15,8
158,07
Hard or equal class B
15,8
177,35
Max, before clipping
15,8
223,23
Max power output
ohm
mW
dBm
Pure or equal class A
62,4
586,93
27,69
Optimal or equal class AB
62,4
738,91
28,69
Hard or equal class B
30,5
747,76
28,74
Max, before clipping
30,5
1492,35
31,74

The table shows a most important technical characteristics of OPPO HA-1 Unbalance

*Center channel is received by data averaging between the left and right channels



Test conditions



Frequency response of OPPO HA-1 Unbalance as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response OPPO HA-1 Unbalance
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,02, 0,08
-0,02, 0,08

Impedance of OPPO HA-1 Unbalance as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Impedance OPPO HA-1 Unbalance
Channel
Left
Right
Impedance average in band from 40 Hz to 15 kHz, ohm
0,4
0,4
Resistance at 500 Hz, ohm
0,5
0,4
Resistance at 1000 Hz, ohm
0,5
0,4
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
46,9
46,9
The minimum value in band from 40 Hz to 15 kHz, ohm
0,3
0,3
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
175,8
175,8
The maximum value in band from 40 Hz to 15 kHz, ohm
0,5
0,5

Frequency response of OPPO HA-1 Unbalance with loaded resistors as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier headphone amplifier OPPO HA-1 Unbalance
with resistive load
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded 16 ohm, dB
0,10
Variation in frequency response in band 40 Hz to 15 kHz loaded 32 ohm, dB
0,05
Variation in frequency response in band 40 Hz to 15 kHz loaded 50 ohm, dB
0,03
Variation in frequency response in band 40 Hz to 15 kHz loaded 100 ohm, dB
0,02
Variation in frequency response in band 40 Hz to 15 kHz loaded 250 ohm, dB
0,01
Variation in frequency response in band 40 Hz to 15 kHz loaded 600 ohm, dB
0,00

*Center channel is received by data averaging between the left and right channels


Frequency response of OPPO HA-1 Unbalance loaded dynamic headphone type as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of the headphone amplifier OPPO HA-1 Unbalance
loaded dynamic headphone type
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz load the dynamic type, dB
0,16

*Center channel is received by data averaging between the left and right channels


Deviation of frequency response of OPPO HA-1 Unbalance loaded dynamic headphone type as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier OPPO HA-1 Unbalance
loaded dynamic headphone type
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz load the dynamic type, dB
0,05

*Center channel is received by data averaging between the left and right channels


Frequency response of OPPO HA-1 Unbalance loaded type balance armature headphone type (one driver) as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier OPPO HA-1 Unbalance
loaded type balanced armature
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded type balanced armature, dB
0,17

*Center channel is received by data averaging between the left and right channels


Deviation of frequency response of OPPO HA-1 Unbalance loaded type balance armature headphone type (one driver) as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier OPPO HA-1 Unbalance
loaded type balanced armature
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded type balanced armature, dB
0,25

*Center channel is received by data averaging between the left and right channels




Maximum voltage output level vs load of OPPO HA-1 Unbalance as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum voltage output level vs load OPPO HA-1 Unbalance (the source data for the spectra)
Limit
Pure or equal class A
Optimal or equal class AB
Hard or equal class B
Max, before clipping
Level
VRMS
dBV
VRMS
dBV
VRMS
dBV
VRMS
dBV
loaded 16 ohm
1,77
4,95
2,50
7,95
2,80
8,95
3,53
10,95
loaded 25 ohm
2,38
7,55
3,37
10,55
4,24
12,55
5,34
14,55
loaded 31 ohm
3,38
10,58
4,26
12,58
4,78
13,58
6,75
16,58
loaded 62 ohm
6,05
15,64
6,79
16,64
6,79
16,64
6,79
16,64
loaded 100 ohm
6,81
16,66
6,81
16,66
6,81
16,66
6,81
16,66
loaded 199 ohm
6,82
16,68
6,82
16,68
6,82
16,68
6,82
16,68
loaded 300 ohm
6,83
16,68
6,83
16,68
6,83
16,68
6,83
16,68
loaded 763 ohm
6,83
16,69
6,83
16,69
6,83
16,69
6,83
16,69
Not loaded
6,83
16,69
6,83
16,69
6,83
16,69
6,83
16,69





The maximum level of voltage from the musical power of OPPO HA-1 Unbalance as AMP mode




Brief information


Table of measured characteristics
Recommended impedances for headphones for OPPO HA-1 Unbalance
Recommended impedance for headphones from the range
8 - 1008 Ом для режима работы усилителя
Equivalent class A
Max, before clipping
For In-Ear Headphones
8 - 1007 ohm
8 - 1007 ohm
For Over-Ear Headphones
8 - 951 ohm
8 - 951 ohm


Table of measured characteristics
OPPO HA-1 Unbalance
Output Impedance
0.42 ohm
Power characteristics of the
Voltage
Current
Equivalent class A
6.83 VRMS
16.69 dBV
106.46 mA
40.54 dB(mA)
Equivalent class AB
6.83 VRMS
16.69 dBV
144.77 mA
43.21 dB(mA)
Equivalent class B
6.83 VRMS
16.69 dBV
168.78 mA
44.55 dB(mA)
Maximum mode
6.83 VRMS
16.69 dBV
220.89 mA
46.88 dB(mA)

Maximum current level output vs load of OPPO HA-1 Unbalance as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum current level output vs load OPPO HA-1 Unbalance (the source data for the spectra)
Level, mA
Pure or equal class A
Optimal or equal class AB
Hard or equal class B
Max, before clipping
Level
mA
dB(mA)
mA
dB(mA)
mA
dB(mA)
mA
dB(mA)
loaded 16 ohm
111,87
40,97
158,07
43,98
177,35
44,98
223,23
46,98
loaded 25 ohm
97,33
39,77
137,51
42,77
173,13
44,77
217,99
46,77
loaded 31 ohm
110,83
40,89
139,55
42,89
156,58
43,89
221,20
46,90
loaded 62 ohm
96,98
39,73
108,82
40,73
108,82
40,73
108,82
40,73
loaded 100 ohm
68,06
36,66
68,06
36,66
68,06
36,66
68,06
36,66
loaded 199 ohm
34,29
30,70
34,29
30,70
34,29
30,70
34,29
30,70
loaded 300 ohm
22,75
27,14
22,75
27,14
22,75
27,14
22,75
27,14
loaded 763 ohm
8,95
19,04
8,95
19,04
8,95
19,04
8,95
19,04
Not loaded
0,14
-17,29
0,14
-17,29
0,14
-17,29
0,14
-17,29



Maximum power level output level vs load of OPPO HA-1 Unbalance as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum power level output level vs load OPPO HA-1 Unbalance (the source data for the spectra)
Limit
Pure or equal class A
Optimal or equal class AB
Hard or equal class B
Max, before clipping
Level
mW
dBm
mW
dBm
mW
dBm
mW
dBm
loaded 16 ohm
197,74
22,96
394,79
25,96
496,93
26,96
787,34
28,96
loaded 25 ohm
232,10
23,66
463,25
26,66
734,32
28,66
1164,22
30,66
loaded 31 ohm
374,66
25,74
593,92
27,74
747,76
28,74
1492,35
31,74
loaded 62 ohm
586,93
27,69
738,91
28,69
738,91
28,69
738,91
28,69
loaded 100 ohm
463,27
26,66
463,27
26,66
463,27
26,66
463,27
26,66
loaded 199 ohm
233,88
23,69
233,88
23,69
233,88
23,69
233,88
23,69
loaded 300 ohm
155,28
21,91
155,28
21,91
155,28
21,91
155,28
21,91
loaded 763 ohm
61,16
17,86
61,16
17,86
61,16
17,86
61,16
17,86
Not loaded
0,93
-0,30
0,93
-0,30
0,93
-0,30
0,93
-0,30





THD vs load vs output voltage of OPPO HA-1 Unbalance as AMP mode


Graphics setting view
Channel:
Load, ohm:
Type test:




Table of measured characteristics

Spectrum of Total Harmonic Distortion vs Level of OPPO HA-1 Unbalance as AMP mode

Not loaded


Graphics setting view
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Channel:
Level, dBV/dBm:




On-line comparison and selection services for OPPO HA-1 Unbalance

The automatic selection of the optimal AMP models from OPPO HA-1 Unbalance.
from the measured power parameters of the amplifying part and the measured parameters of the headphones for different purpose of use.


Close

Measurements of OPPO HA-1 Unbalance were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The OPPO HA-1 Unbalance test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a headphones and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com




OPPO HA-1 is available in reports and services. You are in a professional report.



Information for entry level users

reports for a newbie (Headphone amplifier)





Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.


Comments

No comments to OPPO HA-1
Commentary view:





Want to leave a comment or ask a question? Register now or log in