Measurement's report Meier Audio 3MOVE test and graphs - Reference Audio Analyzer

Meier Audio 3MOVE is available in reports and services. You are in a professional report.



Information for entry level users

report for a newbie

Information for all


Reports / Meier Audio / 3MOVE / Amplifier path / report for a pro

Test report Meier Audio 3MOVE (report for a pro)






Test report - general data of Meier Audio 3MOVE as AMP mode

Frequency response, Impedance and Frequency response with standard headphones


Graphics setting view
Range, dB:


General results
General results
Meier Audio 3MOVE
Channel
Left
Average variation in FR in the band 40 Hz to 15 kHz, dB
-0,07, 0,35
Average value of impedance band in 40 Hz to 15 kHz, ohm
9,7
Max voltage output
VRMS
dBV
Maximum current output at loaded
ohm
mA
Max power output
ohm
mW
dBm

The table shows a most important technical characteristics of Meier Audio 3MOVE



Test conditions
  • For record of test signals RAA was used ADC: E-MU 1616m
  • During tests RAA software-hardware measuring complex was used galvanic isolated power transformer and was excluded the effect of ground loop in the spectra



Frequency response of Meier Audio 3MOVE as AMP mode


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response Meier Audio 3MOVE
Channel
Left
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,04, 0,19

Impedance of Meier Audio 3MOVE as AMP mode





Table of measured characteristics
Impedance Meier Audio 3MOVE
Channel
Left
Impedance average in band from 40 Hz to 15 kHz, ohm
9,7
Resistance at 500 Hz, ohm
9,7
Resistance at 1000 Hz, ohm
9,7
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
1321,0
The minimum value in band from 40 Hz to 15 kHz, ohm
9,7
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
14899,8
The maximum value in band from 40 Hz to 15 kHz, ohm
10,1

Frequency response of Meier Audio 3MOVE with loaded resistors as AMP mode


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response of amplifier headphone amplifier Meier Audio 3MOVE
with resistive load
Channel
Left
Variation in frequency response in band 40 Hz to 15 kHz loaded 16 ohm, dB
0,14
Variation in frequency response in band 40 Hz to 15 kHz loaded 32 ohm, dB
0,09
Variation in frequency response in band 40 Hz to 15 kHz loaded 50 ohm, dB
0,06
Variation in frequency response in band 40 Hz to 15 kHz loaded 100 ohm, dB
0,03
Variation in frequency response in band 40 Hz to 15 kHz loaded 250 ohm, dB
0,01
Variation in frequency response in band 40 Hz to 15 kHz loaded 600 ohm, dB
0,01

Frequency response of Meier Audio 3MOVE loaded dynamic headphone type as AMP mode


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response of the headphone amplifier Meier Audio 3MOVE
loaded dynamic headphone type
Channel
Left
Variation in frequency response in band 40 Hz to 15 kHz load the dynamic type, dB
0,93

Deviation of frequency response of Meier Audio 3MOVE loaded dynamic headphone type as AMP mode


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response of amplifier Meier Audio 3MOVE
loaded dynamic headphone type
Channel
Left
Variation in frequency response in band 40 Hz to 15 kHz load the dynamic type, dB
0,94

Frequency response of Meier Audio 3MOVE loaded type balance armature headphone type (one driver) as AMP mode


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response of amplifier Meier Audio 3MOVE
loaded type balanced armature
Channel
Left
Variation in frequency response in band 40 Hz to 15 kHz loaded type balanced armature, dB
3,98

Deviation of frequency response of Meier Audio 3MOVE loaded type balance armature headphone type (one driver) as AMP mode


Graphics setting view
Range, dB:




Table of measured characteristics
Frequency response of amplifier Meier Audio 3MOVE
loaded type balanced armature
Channel
Left
Variation in frequency response in band 40 Hz to 15 kHz loaded type balanced armature, dB
3,57



Close

Measurements of Meier Audio 3MOVE were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The Meier Audio 3MOVE test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a headphones and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com




Meier Audio 3MOVE is available in reports and services. You are in a professional report.



Information for entry level users

report for a newbie

Information for all






Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.


Comments

No comments to Meier Audio 3MOVE
Commentary view:





Want to leave a comment or ask a question? Register now or log in