Measurement's report Lexxx Rpi-013 (Lynx D68) Bolero test and graphs - Reference Audio Analyzer




Test report - general data of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode

Frequency response


Graphics setting view
Range, dB:

Voltage levels from the load at the output of the amplifier


General results
General results
Lexxx Rpi-013 (Lynx D68) Bolero
Channel
Summary (Right + Left)
Average variation in FR in the band 40 Hz to 15 kHz, dB
-0,08, 0,03
Average value of impedance band in 40 Hz to 15 kHz, ohm
0,0
Max voltage output
VRMS
dBV
Maximum current output at loaded
ohm
mA
Max power output
ohm
mW
dBm

The table shows a most important technical characteristics of Lexxx Rpi-013 (Lynx D68) Bolero

*Center channel is received by data averaging between the left and right channels



Test conditions



Frequency response of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response Lexxx Rpi-013 (Lynx D68) Bolero
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,08, 0,03
-0,07, 0,03

Crosstalk of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics

Crosstalk Phase of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode


Graphics setting view
Channel:



THD vs output voltage of line out of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode


Graphics setting view
Channel:
Type test:




Table of measured characteristics

Total Harmonic Distortion vs Level (dBFS) of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode

Not loaded


Graphics setting view
Channel:
Level, dBV:



Spectrum of IMD SMPTE vs Level (dBFS) of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode

Not loaded


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV:



Spectrum of IMD CCIF vs Level (dBFS) of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode

Not loaded


Graphics setting view
Channel:
Level, dBV:



Spectrum of Multitone Distortion vs Level (dBFS) of Lexxx Rpi-013 (Lynx D68) Bolero as Line Out mode

Not loaded


Graphics setting view
Channel:
Level, dBV:




On-line comparison and selection services for Lexxx Rpi-013 (Lynx D68) Bolero




More detailed

Measurements of Lexxx Rpi-013 (Lynx D68) Bolero were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The Lexxx Rpi-013 (Lynx D68) Bolero test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com



Information for Authors. You can freely use the graphics in your articles with a link to us.




Lexxx Rpi-013 (Lynx D68) is available in reports and services. You are in a professional report.

Information for entry level users


Information for professionals
      reports for a pro (DAC Line Out)
      Comparison of on-line graphs










      Original text in Russian page. Translation page is not yet ready

      You can help with translation via the: facebook and feedback.




      Comments

      No comments to Lexxx Rpi-013 (Lynx D68)
      Commentary view:





      Want to leave a comment or ask a question? Register now or log in