This is a report for professionals with a suite of test of headphone amplifier.
You can see a simple report for "dummies" with explanations of the main characteristics for iBasso DX 170 Single-ended Out

A suite of tests for a headphone amplifier can be applied to just a universal output without a formal presence of an amplifier, if in this mode you can connect headphones to this output. Based on the results of the tests, you can understand the real picture, is the output powerful enough or not, with the initial data on the circuitry as a "black box".

Line-out, differences from the output for headphones and speakers

Advantages and disadvantages of balanced amplifiers

Test report - general data iBasso DX 170 (as headphone amplifier)

Frequency response, Impedance and Frequency response with standard headphones

Voltage levels from the load at the output of the amplifier

Average value of impedance band in 40 Hz - 15 kHz	0.3	ohm
Voltage: Linear Mode / Maximum or before clipping level	10.1/10.1	dBV
	3.2/3.2	V_RMS
Current: Linear Mode / Maximum or before clipping level	36.6/40.2	dB(mA)
	67.8/101.9	mA

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Frequency response iBasso DX 170 Single-ended Out (as headphone amplifier)

Graphics setting view

Channel

Range

Channel:	Left	Right
Variation in frequency response in band from 40 Hz - 15 kHz	-0.1, +0.0	-0.1, +0.0	dB

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response

Impedance iBasso DX 170 Single-ended Out (as headphone amplifier)

Graphics setting view

Channel

Channel:	Left	Right
Impedance average in band from 40 Hz - 15 kHz	0.3	0.3	ohm
The minimum value in band from 40 Hz - 15 kHz	0.3	0.3	ohm
The maximum value in band from 40 Hz - 15 kHz	0.3	0.3	ohm

Comparison of basic characteristics AMPs

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Crosstalk iBasso DX 170 Single-ended Out (as headphone amplifier)

Graphics setting view

Channel

Range

Load

Channel:	Left	Right
Crosstalk @ 1 kHz @ 15.8 ohm	-53.4	-53.5	dB
Crosstalk @ 1 kHz @ 24.5 ohm	-56.6	-56.7	dB
Crosstalk @ 1 kHz @ 30.5 ohm	-58.8	-58.8	dB
Crosstalk @ 1 kHz @ 62.4 ohm	-64.9	-65.0	dB
Crosstalk @ 1 kHz @ 100.0 ohm	-68.9	-69.0	dB
Crosstalk @ 1 kHz @ 198.9 ohm	-74.9	-74.9	dB
Crosstalk @ 1 kHz @ 300.0 ohm	-78.3	-78.3	dB
Crosstalk @ 1 kHz @ 763.0 ohm	-85.7	-85.9	dB
Crosstalk @ 1 kHz @ Not loaded	-107.3	-106.1	dB

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Crosstalk Phase iBasso DX 170 Single-ended Out (as headphone amplifier)

Graphics setting view

Channel

Load

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Frequency response iBasso DX 170 Single-ended Out with resistive load

Graphics setting view

Channel

Range

Frequency response of amplifier with resistive load @ 40 Hz - 15 kHz

Channel:	Left	Right
TEST 16 ? + iBasso DX 170 Single-ended Out	0.0	0.0	dB
TEST 32 ? + iBasso DX 170 Single-ended Out	0.0	0.0	dB
TEST 64 ? + iBasso DX 170 Single-ended Out	0.0	0.0	dB
TEST 126 ? + iBasso DX 170 Single-ended Out	0.0	0.0	dB
TEST 256 ? + iBasso DX 170 Single-ended Out	0.0	0.0	dB
TEST 512 ? + iBasso DX 170 Single-ended Out	0.0	0.0	dB

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response

Frequency response iBasso DX 170 Single-ended Out loaded dynamic headphone type

Graphics setting view

Channel

Range

Frequency response of amplifier loaded dynamic headphone type @ 40 Hz - 15 kHz

Channel:	Left	Right
TEST 10000 ? + iBasso DX 170 Single-ended Out	0.0	0.0	dB
Grado GH4 Limited Edition + iBasso DX 170 Single-ended Out	0.1	0.1	dB

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response

Frequency response iBasso DX 170 Single-ended Out loaded type balance armature headphone type

Graphics setting view

Channel

Range

Frequency response of amplifier loaded type balance armature headphone type @ 40 Hz - 15 kHz

Channel:	Left	Right
TEST 10000 ? + iBasso DX 170 Single-ended Out	0.0	0.0	dB
Campfire Audio Andromeda + iBasso DX 170 Single-ended Out	0.5	0.6	dB
Fearless Audio S8F Freedom + iBasso DX 170 Single-ended Out	0.4	0.4	dB

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response

THD vs load vs output voltage iBasso DX 170 Single-ended Out

Graphics setting view

Channel

Load

Harmonic, number

Graphics setting view

Channel

Load

Harmonic, number

Graphics setting view

Channel

Load

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Maximum voltage output level vs load iBasso DX 170 Single-ended Out

Graphics setting view

Type of chart

RAW coordinates

Power characteristics of the	Voltage		Current
	dBV	V_RMS	dB(mA)	mA
Equivalent class A	10.1	3.2	36.6	67.8
Equivalent class AB	10.1	3.2	36.6	67.8
Equivalent class B	10.1	3.2	36.6	67.8
Maximum mode	10.1	3.2	40.2	101.9

Volume Control Type	Digital
Optimal range of volume control	50.0	dB
Signal/Noise / Maximum	120.0/10.1	dB/dBV
Signal/Noise @ -14.9 dBV 32 ohm (1 mW)	95.00	dB
Signal/Noise @ -5.2 dBV 300 ohm (1 mW)	104.64	dB

Comparison iBasso DX 170 Single-ended Out and another amplifiers by loudness (Volume Level)

Main characteristics of the iBasso DX 170 Single-ended Out

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Maximum voltage output level vs load iBasso DX 170 Single-ended Out

Graphics setting view

Type of chart

RAW coordinates

Maximum Amplifier Voltage Level

Load	Pure or equal class A		Optimal or equal class AB		Hard or equal class B		Max, before clipping
	dBV	V_RMS	dBV	V_RMS	dBV	V_RMS	dBV	V_RMS
15.8 ohm	1.0	1.1	1.0	1.1	1.0	1.1	5.0	1.1
24.5 ohm	4.0	1.6	4.0	1.6	4.0	1.6	7.0	1.6
30.5 ohm	4.6	1.7	5.6	1.7	5.6	1.7	8.6	1.7
62.4 ohm	7.1	2.3	8.1	2.3	8.1	2.3	10.1	2.3
100 ohm	8.1	2.5	10.1	2.5	10.1	2.5	10.1	2.5
198.9 ohm	9.1	2.9	10.1	2.9	10.1	2.9	10.1	2.9
300 ohm	9.1	2.9	10.1	2.9	10.1	2.9	10.1	2.9
763 ohm	9.1	2.9	10.1	2.9	10.1	2.9	10.1	2.9
Not loaded	10.1	3.2	10.1	3.2	10.1	3.2	10.1	3.2

Maximum level of amplifier current

Load	Pure or equal class A		Optimal or equal class AB		Hard or equal class B		Max, before clipping
	dB(mA)	mA	dB(mA)	mA	dB(mA)	mA	dB(mA)	mA
15.8 ohm	37.0	70.8	37.0	70.8	37.0	70.8	41.0	112.2
24.5 ohm	36.2	64.9	36.2	64.9	36.2	64.9	39.2	91.7
30.5 ohm	34.9	55.4	35.9	62.2	35.9	62.2	38.9	87.8
62.4 ohm	31.2	36.3	32.2	40.7	32.2	40.7	34.2	51.3
100 ohm	28.1	25.5	30.1	32.0	30.1	32.0	30.1	32.0
198.9 ohm	23.2	14.4	24.2	16.1	24.2	16.1	24.2	16.1
300 ohm	19.6	9.5	20.6	10.7	20.6	10.7	20.6	10.7
763 ohm	11.5	3.8	12.5	4.2	12.5	4.2	12.5	4.2

Power

Load	Pure or equal class A		Optimal or equal class AB		Hard or equal class B		Max, before clipping
	dBm	mW	dBm	mW	dBm	mW	dBm	mW
15.8 ohm	19.0	79.2	19.0	79.2	19.0	79.2	23.0	198.9
24.5 ohm	20.1	103.2	20.1	103.2	20.1	103.2	23.1	206.0
30.5 ohm	19.7	93.6	20.7	117.8	20.7	117.8	23.7	235.1
62.4 ohm	19.1	82.2	20.1	103.4	20.1	103.4	22.1	164.0
100 ohm	18.1	64.8	20.1	102.7	20.1	102.7	20.1	102.7
198.9 ohm	16.1	41.1	17.1	51.8	17.1	51.8	17.1	51.8
300 ohm	14.4	27.3	15.4	34.4	15.4	34.4	15.4	34.4
763 ohm	10.3	10.8	11.3	13.5	11.3	13.5	11.3	13.5

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Spectrum of Total Harmonic Distortion vs Level iBasso DX 170 Single-ended Out (as headphone amplifier)

Graphics setting view

Channel

Level

Range

Graphics setting view

Channel

Level

Range

Graphics setting view

Channel

Shift

dBm

Range

Graphics setting view

Channel

Shift

dBV

Range

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Spectrum of Multitone Distortion vs Level vs Load iBasso DX 170 Single-ended Out (as headphone amplifier)

Graphics setting view

Channel

Level

Range

Graphics setting view

Channel

Level

Range

Graphics setting view

Channel

Shift

dBm

Range

Graphics setting view

Channel

Shift

dBV

Range

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Spectrum of IMD SMPTE vs Level iBasso DX 170 Single-ended Out (as headphone amplifier)

Graphics setting view

Channel

Level

Range

Range

Graphics setting view

Channel

Level

Range

Range

Graphics setting view

Channel

Shift

Range

dBm

Range

Graphics setting view

Channel

Shift

Range

dBV

Range

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

Spectrum of IMD CCIF vs Level iBasso DX 170 Single-ended Out (as headphone amplifier)

Graphics setting view

Channel

Level

Range

Graphics setting view

Channel

Level

Range

Graphics setting view

Channel

Shift

dBm

Range

Graphics setting view

Channel

Shift

dBV

Range

Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

More detailed

Measurements of iBasso DX 170 Single-ended Out were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The iBasso DX 170 Single-ended Out test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a headphones and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.

Kuznetsov Roman
Founder of RAA

Known by the nickname romanrex
Аuthor of articles iXBT.com

Information for Authors. You can freely use the graphics in your articles with a link to us.

iBasso DX 170 is available in reports and services. You are in a professional report.

Information for entry level users

reports for a newbie (Headphone amplifier)

The automatic selection of the optimal AMP models

Information for all

Review

Versus of characteristics

Information for professionals

reports for a pro (Headphone amplifier)

reports for a pro (DAC Line Out)

Comparison of on-line graphs

Quick jump to the schedule in this report: Single-ended Out

Original text in Russian page. Translation page is not yet ready

You can help with translation via the: facebook and feedback.

Comments

romanrex
Изображения, медиа и смайлы доступны в исходном чате.
2022-11-19 22:45:06

Комментарий к обзору о iBasso DX 170

Производителю были направлены различные вопросы и пожелания и на данный момент появилась информация, что темную тему добавят в следующем обновлении! Наверно, помимо DX 170 это будет сделано и для DX 320, т.к. используется одинаковая ОС.

PTGDAEMON
Изображения, медиа и смайлы доступны в исходном чате.
2022-12-07 13:45:32

Комментарий к обзору о iBasso DX 170

Дефекты звучания цапов CS в данном плеере не проявляются?

romanrex
Изображения, медиа и смайлы доступны в исходном чате.
2022-12-07 17:27:50

Комментарий к обзору о iBasso DX 170

PTGDAEMON 2022-12-07 13:45:32
Комментарий к обзору о iBasso DX 170
Дефекты звучания цапов CS в данном плеере не проявляются?

Пока это есть у всех продуктов на этих ЦАП.

Т.к. эти дефекты не слышат ни популярные ревьюверы, ни большинство пользователей, то и производители об этой проблеме не в курсе.

С iBasso пока идет обсуждение. А там посмотрим, будут решать или нет, и решаемо ли это вообще. Надеюсь, что ЦАП возможно перевести в нормальный режим.

Want to leave a comment or ask a question? Register now or log in

	Login	Password
You are logged in as guest
Setting	Register	Forgot your password?