Measurement's report Hidizs AP100 test and graphs - Reference Audio Analyzer

Hidizs AP100 is available in reports and services. You are in a professional report.

Service and suite of tests

Information for entry level users

report for a newbie
(Headphone amplifier)

General recommendations

The automatic selection of the optimal AMP models

Information for all

Comparison of on-line graphs


Reports / Hidizs / AP100 / Amplifier path / report for a pro

Test report Hidizs AP100 (report for a pro)






Test report - general data of Hidizs AP100 as AMP mode

Frequency response, Impedance and Frequency response with standard headphones


Graphics setting view
Range, dB:

The maximum level of voltage from the musical power



General results
General results
Hidizs AP100
Channel
Center/Summary
Average variation in FR in the band 40 Hz to 15 kHz, dB
-0,05, 0,01
Average value of impedance band in 40 Hz to 15 kHz, ohm
0,3
Max voltage output
VRMS
dBV
Pure or equal class AF.A.Q.
2,00
6,01
Optimal or equal class ABF.A.Q.
2,00
6,01
Hard or equal class BF.A.Q.
2,00
6,01
Max, before clippingF.A.Q.
2,00
6,01
Maximum current output at loaded
ohm
mA
Pure or equal class AF.A.Q.
30,5
16,37
Optimal or equal class ABF.A.Q.
30,5
36,65
Hard or equal class BF.A.Q.
15,8
110,21
Max, before clippingF.A.Q.
15,8
123,66
Max power output
ohm
mW
dBm
Pure or equal class AF.A.Q.
198,9
20,00
13,01
Optimal or equal class ABF.A.Q.
62,4
63,28
18,01
Hard or equal class BF.A.Q.
15,8
191,90
22,83
Max, before clippingF.A.Q.
15,8
241,60
23,83

The table shows a most important technical characteristics of Hidizs AP100

*Center channel is received by data averaging between the left and right channels



Test conditions



On-line калькулятор Hidizs AP100

Уровень сигнала в dBFS от значений делений громкости в плеере Hidizs AP100
Введите значение громкости с экрана плеера

  делений = - dBFS Считать

Данные по регулировке громкости для Hidizs AP100:
от 80 до 50 каждое деление равно 0,5 дБ
от 50 до 10 каждое деление равно 1 дБ
от 10 до 1 каждое деление равно 3 дБ


Frequency response of Hidizs AP100 as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response Hidizs AP100
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,02, 0,00
-0,02, 0,00

Impedance of Hidizs AP100 as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Impedance Hidizs AP100
Channel
Left
Right
Impedance average in band from 40 Hz to 15 kHz, ohm
0,2
0,4
Resistance at 500 Hz, ohm
0,2
0,4
Resistance at 1000 Hz, ohm
0,2
0,4
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
14028,9
14028,9
The minimum value in band from 40 Hz to 15 kHz, ohm
0,2
0,4
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
45,6
45,6
The maximum value in band from 40 Hz to 15 kHz, ohm
0,8
0,9

Crosstalk of Hidizs AP100 as AMP mode


Graphics setting view
Range, dB:
Channel:
Load, ohm:




Table of measured characteristics

Frequency response of Hidizs AP100 with loaded resistors as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier headphone amplifier Hidizs AP100
with resistive load
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded 16 ohm, dB
0,30
Variation in frequency response in band 40 Hz to 15 kHz loaded 32 ohm, dB
0,15
Variation in frequency response in band 40 Hz to 15 kHz loaded 50 ohm, dB
0,10
Variation in frequency response in band 40 Hz to 15 kHz loaded 100 ohm, dB
0,05
Variation in frequency response in band 40 Hz to 15 kHz loaded 250 ohm, dB
0,02
Variation in frequency response in band 40 Hz to 15 kHz loaded 600 ohm, dB
0,01

*Center channel is received by data averaging between the left and right channels


Frequency response of Hidizs AP100 loaded dynamic headphone type as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of the headphone amplifier Hidizs AP100
loaded dynamic headphone type
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz load the dynamic type, dB
0,07

*Center channel is received by data averaging between the left and right channels


Deviation of frequency response of Hidizs AP100 loaded dynamic headphone type as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier Hidizs AP100
loaded dynamic headphone type
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz load the dynamic type, dB
0,05

*Center channel is received by data averaging between the left and right channels


Frequency response of Hidizs AP100 loaded type balance armature headphone type (one driver) as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier Hidizs AP100
loaded type balanced armature
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded type balanced armature, dB
0,48

*Center channel is received by data averaging between the left and right channels


Deviation of frequency response of Hidizs AP100 loaded type balance armature headphone type (one driver) as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier Hidizs AP100
loaded type balanced armature
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded type balanced armature, dB
0,43

*Center channel is received by data averaging between the left and right channels




Maximum voltage output level vs load of Hidizs AP100 as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum voltage output level vs load Hidizs AP100 (the source data for the spectra)
Limit
Pure or equal class AF.A.Q.
Optimal or equal class ABF.A.Q.
Hard or equal class BF.A.Q.
Max, before clippingF.A.Q.
Level
VRMS
dBV
VRMS
dBV
VRMS
dBV
VRMS
dBV
loaded 16 ohm
0,17
-15,18
0,49
-6,18
1,74
4,82
1,95
5,82
loaded 25 ohm
0,35
-9,08
0,70
-3,08
1,98
5,92
1,98
5,92
loaded 31 ohm
0,50
-6,03
1,12
0,97
1,99
5,96
1,99
5,96
loaded 62 ohm
0,71
-3,03
1,99
5,96
1,99
5,96
1,99
5,96
loaded 100 ohm
1,12
0,98
1,99
5,98
1,99
5,98
1,99
5,98
loaded 199 ohm
1,99
6,00
1,99
6,00
1,99
6,00
1,99
6,00
loaded 300 ohm
2,00
6,00
2,00
6,00
2,00
6,00
2,00
6,00
loaded 763 ohm
2,00
6,01
2,00
6,01
2,00
6,01
2,00
6,01
Not loaded
2,00
6,01
2,00
6,01
2,00
6,01
2,00
6,01





The maximum level of voltage from the musical power of Hidizs AP100 as AMP mode

Ваш браузер не поддерживает Canvas



Brief information


Table of measured characteristics
Recommended impedances for headphones for Hidizs AP100
Recommended impedance for headphones from the range
8 - 1008 Ом для режима работы усилителя
Equivalent class A F.A.Q.
Max, before clippingF.A.Q.
For In-Ear Headphones
8 - 809 ohm
8 - 809 ohm
For Over-Ear Headphones
16 - 102 ohm
8 - 102 ohm


Table of measured characteristics
Hidizs AP100
Output Impedance
0.34 ohm
Power characteristics of the
Voltage
Current
Equivalent class A F.A.Q.
2.00 VRMS
6.01 dBV
12.19 mA
21.72 dB(mA)
Equivalent class AB F.A.Q.
2.00 VRMS
6.01 dBV
31.92 mA
30.08 dB(mA)
Equivalent class B F.A.Q.
2.00 VRMS
6.01 dBV
110.15 mA
40.84 dB(mA)
Maximum mode F.A.Q.
2.00 VRMS
6.01 dBV
123.59 mA
41.84 dB(mA)

Maximum current level output vs load of Hidizs AP100 as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum current level output vs load Hidizs AP100 (the source data for the spectra)
Level, mA
Pure or equal class AF.A.Q.
Optimal or equal class ABF.A.Q.
Hard or equal class BF.A.Q.
Max, before clippingF.A.Q.
Level
mA
dB(mA)
mA
dB(mA)
mA
dB(mA)
mA
dB(mA)
loaded 16 ohm
11,03
20,85
31,07
29,85
110,21
40,84
123,66
41,84
loaded 25 ohm
14,35
23,14
28,63
29,14
80,66
38,13
80,66
38,13
loaded 31 ohm
16,37
24,28
36,65
31,28
65,15
36,28
65,15
36,28
loaded 62 ohm
11,30
21,06
31,85
30,06
31,85
30,06
31,85
30,06
loaded 100 ohm
11,20
20,98
19,91
25,98
19,91
25,98
19,91
25,98
loaded 199 ohm
10,03
20,02
10,03
20,02
10,03
20,02
10,03
20,02
loaded 300 ohm
6,65
16,46
6,65
16,46
6,65
16,46
6,65
16,46
loaded 763 ohm
2,62
8,36
2,62
8,36
2,62
8,36
2,62
8,36
Not loaded
0,04
-27,97
0,04
-27,97
0,04
-27,97
0,04
-27,97



Maximum power level output level vs load of Hidizs AP100 as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum power level output level vs load Hidizs AP100 (the source data for the spectra)
Limit
Pure or equal class AF.A.Q.
Optimal or equal class ABF.A.Q.
Hard or equal class BF.A.Q.
Max, before clippingF.A.Q.
Level
mW
dBm
mW
dBm
mW
dBm
mW
dBm
loaded 16 ohm
1,92
2,83
15,25
11,83
191,90
22,83
241,60
23,83
loaded 25 ohm
5,04
7,03
20,08
13,03
159,38
22,02
159,38
22,02
loaded 31 ohm
8,18
9,13
40,97
16,12
129,47
21,12
129,47
21,12
loaded 62 ohm
7,97
9,02
63,28
18,01
63,28
18,01
63,28
18,01
loaded 100 ohm
12,54
10,98
39,64
15,98
39,64
15,98
39,64
15,98
loaded 199 ohm
20,00
13,01
20,00
13,01
20,00
13,01
20,00
13,01
loaded 300 ohm
13,27
11,23
13,27
11,23
13,27
11,23
13,27
11,23
loaded 763 ohm
5,22
7,18
5,22
7,18
5,22
7,18
5,22
7,18
Not loaded
0,08
-10,98
0,08
-10,98
0,08
-10,98
0,08
-10,98





THD vs load vs output voltage of Hidizs AP100 as AMP mode


Graphics setting view
Channel:
Load, ohm:
Type test:




Table of measured characteristics

Spectrum of Total Harmonic Distortion vs Level of Hidizs AP100 as AMP mode

Not loaded


Graphics setting view
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Channel:
Level, dBV/dBm:



Spectrum of IMD SMPTE vs Level of Hidizs AP100 as AMP mode

Not loaded


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:



Spectrum of IMD CCIF vs Level of Hidizs AP100 as AMP mode

Not loaded


Graphics setting view
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Channel:
Level, dBV/dBm:



Spectrum of Multitone Distortion vs Level vs Load of Hidizs AP100 as AMP mode

Not loaded


Graphics setting view
Channel:
Level, dBV:
Type test:

Loaded 15,8 ohm


Graphics setting view
Channel:
Level, dBV/dBm:
Type test:

Loaded 24,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:
Type test:

Loaded 30,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:
Type test:

Loaded 62,4 ohm


Graphics setting view
Channel:
Level, dBV/dBm:
Type test:

Loaded 100 ohm


Graphics setting view
Channel:
Level, dBV/dBm:
Type test:

Loaded 198,9 ohm


Graphics setting view
Channel:
Level, dBV/dBm:
Type test:

Loaded 300 ohm


Graphics setting view
Channel:
Level, dBV/dBm:
Type test:

Loaded 763 ohm


Graphics setting view
Channel:
Level, dBV/dBm:
Type test:



Spectrum of Noise Distortion vs Level vs Load of Hidizs AP100 as AMP mode

Not loaded


Graphics setting view
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Channel:
Level, dBV/dBm:




On-line comparison and selection services for Hidizs AP100

The automatic selection of the optimal AMP models from Hidizs AP100 .
from the measured power parameters of the amplifying part and the measured parameters of the headphones for different purpose of use.


Close

Measurements of Hidizs AP100 were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The Hidizs AP100 test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a headphones and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com




Hidizs AP100 is available in reports and services. You are in a professional report.

Service and suite of tests

Information for entry level users

report for a newbie
(Headphone amplifier)

General recommendations

The automatic selection of the optimal AMP models

Information for all

Comparison of on-line graphs






Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.


Comments

No comments to Hidizs AP100
Commentary view:





Want to leave a comment or ask a question? Register now or log in