Measurement's report FiiO K5 Mid test and graphs - Reference Audio Analyzer

FiiO K5 is available in reports and services. You are in a professional report.

Service and suite of tests

Information for entry level users

report for a newbie
(Headphone amplifier)

General recommendations

The automatic selection of the optimal AMP models

Information for all

Comparison of on-line graphs


Reports / FiiO / K5 / Mid / Amplifier path / report for a pro

Test report FiiO K5: Mid (report for a pro)






Test report - general data of FiiO K5 Mid as AMP mode

Frequency response, Impedance and Frequency response with standard headphones


Graphics setting view
Range, dB:

The maximum level of voltage from the musical power



General results
General results
FiiO K5 Mid
Channel
Center/Summary
Average variation in FR in the band 40 Hz to 15 kHz, dB
-0,06, 0,04
Average value of impedance band in 40 Hz to 15 kHz, ohm
0,0
Max voltage output
VRMS
dBV
Pure or equal class AF.A.Q.
4,18
12,41
Optimal or equal class ABF.A.Q.
4,18
12,41
Hard or equal class BF.A.Q.
4,18
12,41
Max, before clippingF.A.Q.
4,18
12,41
Maximum current output at loaded
ohm
mA
Pure or equal class AF.A.Q.
24,5
60,43
Optimal or equal class ABF.A.Q.
15,8
263,60
Hard or equal class BF.A.Q.
15,8
263,60
Max, before clippingF.A.Q.
15,8
263,60
Max power output
ohm
mW
dBm
Pure or equal class AF.A.Q.
100,0
174,25
22,41
Optimal or equal class ABF.A.Q.
15,8
1097,85
30,41
Hard or equal class BF.A.Q.
15,8
1097,85
30,41
Max, before clippingF.A.Q.
15,8
1097,85
30,41

The table shows a most important technical characteristics of FiiO K5 Mid

*Center channel is received by data averaging between the left and right channels



Test conditions



Frequency response of FiiO K5 Mid as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response FiiO K5 Mid
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-0,06, 0,05
-0,06, 0,03

Impedance of FiiO K5 Mid as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Impedance FiiO K5 Mid
Channel
Left
Right
Impedance average in band from 40 Hz to 15 kHz, ohm
0,0
0,0
Resistance at 500 Hz, ohm
0,0
0,0
Resistance at 1000 Hz, ohm
0,0
0,0
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
45,6
45,6
The minimum value in band from 40 Hz to 15 kHz, ohm
0,0
0,0
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
14028,9
14028,9
The maximum value in band from 40 Hz to 15 kHz, ohm
0,1
0,1

Crosstalk of FiiO K5 Mid as AMP mode


Graphics setting view
Range, dB:
Channel:
Load, ohm:




Table of measured characteristics

Crosstalk Phase of FiiO K5 Mid as AMP mode


Graphics setting view
Channel:
Load, ohm:



Frequency response of FiiO K5 Mid with loaded resistors as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier headphone amplifier FiiO K5 Mid
with resistive load
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded 16 ohm, dB
0,01
Variation in frequency response in band 40 Hz to 15 kHz loaded 32 ohm, dB
0,01
Variation in frequency response in band 40 Hz to 15 kHz loaded 50 ohm, dB
0,00
Variation in frequency response in band 40 Hz to 15 kHz loaded 100 ohm, dB
0,00
Variation in frequency response in band 40 Hz to 15 kHz loaded 250 ohm, dB
0,00
Variation in frequency response in band 40 Hz to 15 kHz loaded 600 ohm, dB
0,00

*Center channel is received by data averaging between the left and right channels


Frequency response of FiiO K5 Mid loaded dynamic headphone type as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of the headphone amplifier FiiO K5 Mid
loaded dynamic headphone type
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz load the dynamic type, dB
0,11

*Center channel is received by data averaging between the left and right channels


Deviation of frequency response of FiiO K5 Mid loaded dynamic headphone type as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier FiiO K5 Mid
loaded dynamic headphone type
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz load the dynamic type, dB
0,01

*Center channel is received by data averaging between the left and right channels


Frequency response of FiiO K5 Mid loaded type balance armature headphone type (one driver) as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier FiiO K5 Mid
loaded type balanced armature
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded type balanced armature, dB
0,12

*Center channel is received by data averaging between the left and right channels


Deviation of frequency response of FiiO K5 Mid loaded type balance armature headphone type (one driver) as AMP mode


Graphics setting view
Range, dB:
Channel:




Table of measured characteristics
Frequency response of amplifier FiiO K5 Mid
loaded type balanced armature
Channel
Center/Summary
Variation in frequency response in band 40 Hz to 15 kHz loaded type balanced armature, dB
0,02

*Center channel is received by data averaging between the left and right channels




Maximum voltage output level vs load of FiiO K5 Mid as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum voltage output level vs load FiiO K5 Mid (the source data for the spectra)
Limit
Pure or equal class AF.A.Q.
Optimal or equal class ABF.A.Q.
Hard or equal class BF.A.Q.
Max, before clippingF.A.Q.
Level
VRMS
dBV
VRMS
dBV
VRMS
dBV
VRMS
dBV
loaded 16 ohm
0,74
-2,60
4,16
12,39
4,16
12,39
4,16
12,39
loaded 25 ohm
1,48
3,41
4,17
12,40
4,17
12,40
4,17
12,40
loaded 31 ohm
1,48
3,41
4,17
12,40
4,17
12,40
4,17
12,40
loaded 62 ohm
2,96
9,41
4,17
12,41
4,17
12,41
4,17
12,41
loaded 100 ohm
4,17
12,41
4,17
12,41
4,17
12,41
4,17
12,41
loaded 199 ohm
4,18
12,41
4,18
12,41
4,18
12,41
4,18
12,41
loaded 300 ohm
4,17
12,41
4,17
12,41
4,17
12,41
4,17
12,41
loaded 763 ohm
4,17
12,41
4,17
12,41
4,17
12,41
4,17
12,41
Not loaded
4,17
12,40
4,17
12,40
4,17
12,40
4,17
12,40





The maximum level of voltage from the musical power of FiiO K5 Mid as AMP mode

Ваш браузер не поддерживает Canvas



Brief information


Table of measured characteristics
Recommended impedances for headphones for FiiO K5 Mid
Recommended impedance for headphones from the range
8 - 1008 Ом для режима работы усилителя
Equivalent class A F.A.Q.
Max, before clippingF.A.Q.
For In-Ear Headphones
8 - 1007 ohm
8 - 1007 ohm
For Over-Ear Headphones
8 - 445 ohm
8 - 445 ohm


Table of measured characteristics
FiiO K5 Mid
Output Impedance
0.04 ohm
Power characteristics of the
Voltage
Current
Equivalent class A F.A.Q.
4.17 VRMS
12.40 dBV
48.63 mA
33.74 dB(mA)
Equivalent class AB F.A.Q.
4.17 VRMS
12.40 dBV
263.59 mA
48.42 dB(mA)
Equivalent class B F.A.Q.
4.17 VRMS
12.40 dBV
263.59 mA
48.42 dB(mA)
Maximum mode F.A.Q.
4.17 VRMS
12.40 dBV
263.59 mA
48.42 dB(mA)

Maximum current level output vs load of FiiO K5 Mid as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum current level output vs load FiiO K5 Mid (the source data for the spectra)
Level, mA
Pure or equal class AF.A.Q.
Optimal or equal class ABF.A.Q.
Hard or equal class BF.A.Q.
Max, before clippingF.A.Q.
Level
mA
dB(mA)
mA
dB(mA)
mA
dB(mA)
mA
dB(mA)
loaded 16 ohm
46,91
33,42
263,60
48,42
263,60
48,42
263,60
48,42
loaded 25 ohm
60,43
35,62
170,21
44,62
170,21
44,62
170,21
44,62
loaded 31 ohm
48,54
33,72
136,73
42,72
136,73
42,72
136,73
42,72
loaded 62 ohm
47,36
33,51
66,88
36,51
66,88
36,51
66,88
36,51
loaded 100 ohm
41,74
32,41
41,74
32,41
41,74
32,41
41,74
32,41
loaded 199 ohm
20,99
26,44
20,99
26,44
20,99
26,44
20,99
26,44
loaded 300 ohm
13,92
22,87
13,92
22,87
13,92
22,87
13,92
22,87
loaded 763 ohm
5,47
14,76
5,47
14,76
5,47
14,76
5,47
14,76
Not loaded
0,08
-21,58
0,08
-21,58
0,08
-21,58
0,08
-21,58



Maximum power level output level vs load of FiiO K5 Mid as AMP mode


Graphics setting view
Channel:




Table of measured characteristics
Maximum power level output level vs load FiiO K5 Mid (the source data for the spectra)
Limit
Pure or equal class AF.A.Q.
Optimal or equal class ABF.A.Q.
Hard or equal class BF.A.Q.
Max, before clippingF.A.Q.
Level
mW
dBm
mW
dBm
mW
dBm
mW
dBm
loaded 16 ohm
34,76
15,41
1097,85
30,41
1097,85
30,41
1097,85
30,41
loaded 25 ohm
89,46
19,52
709,79
28,51
709,79
28,51
709,79
28,51
loaded 31 ohm
71,86
18,57
570,17
27,56
570,17
27,56
570,17
27,56
loaded 62 ohm
139,96
21,46
279,12
24,46
279,12
24,46
279,12
24,46
loaded 100 ohm
174,25
22,41
174,25
22,41
174,25
22,41
174,25
22,41
loaded 199 ohm
87,64
19,43
87,64
19,43
87,64
19,43
87,64
19,43
loaded 300 ohm
58,09
17,64
58,09
17,64
58,09
17,64
58,09
17,64
loaded 763 ohm
22,83
13,59
22,83
13,59
22,83
13,59
22,83
13,59
Not loaded
0,35
-4,59
0,35
-4,59
0,35
-4,59
0,35
-4,59





THD vs load vs output voltage of FiiO K5 Mid as AMP mode


Graphics setting view
Channel:
Load, ohm:
Type test:




Table of measured characteristics

Spectrum of Total Harmonic Distortion vs Level of FiiO K5 Mid as AMP mode

Not loaded


Graphics setting view
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Channel:
Level, dBV/dBm:



Spectrum of IMD SMPTE vs Level of FiiO K5 Mid as AMP mode

Not loaded


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Frequency band, Hz:
Channel:
Level, dBV/dBm:



Spectrum of IMD CCIF vs Level of FiiO K5 Mid as AMP mode

Not loaded


Graphics setting view
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Channel:
Level, dBV/dBm:



Spectrum of Multitone Distortion vs Level vs Load of FiiO K5 Mid as AMP mode

Not loaded


Graphics setting view
Channel:
Level, dBV:

Loaded 15,8 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 24,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 30,5 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 62,4 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 100 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 198,9 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 300 ohm


Graphics setting view
Channel:
Level, dBV/dBm:

Loaded 763 ohm


Graphics setting view
Channel:
Level, dBV/dBm:




On-line comparison and selection services for FiiO K5 Mid

The automatic selection of the optimal AMP models from FiiO K5 Mid.
from the measured power parameters of the amplifying part and the measured parameters of the headphones for different purpose of use.


Close

Measurements of FiiO K5 Mid were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The FiiO K5 Mid test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a headphones and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com




FiiO K5 is available in reports and services. You are in a professional report.

Service and suite of tests

Information for entry level users

report for a newbie
(Headphone amplifier)

General recommendations

The automatic selection of the optimal AMP models

Information for all

Comparison of on-line graphs






Original text in Russian page. Translation page is not yet ready

You can help with translation via the: forum, facebook and feedback.


Comments

No comments to FiiO K5
Commentary view:





Want to leave a comment or ask a question? Register now or log in