After testing in the benchmark mode in the Reference Audio Analyzer software, the data is added to the online database of the RAA website.
You can view the test results on the comparison pages
and summary reports for beginners
and professionals. You can go to the desired report or comparison/selection service through the menu on this page. Additionally, you can go to the comparison pages from any graph in this report and add other tested products for direct comparison.
This is a report on compliance with target frequency response curves with recommended equalizer settings for Tin HiFi P1 Sealed all.
You can additionally look for Tin HiFi P1 Sealed all
You can view the test results on the comparison pages
and summary reports for beginners and professionals. You can go to the desired report or comparison/selection service through the menu on this page. Additionally, you can go to the comparison pages from any graph in this report and add other tested products for direct comparison.This is a report on compliance with target frequency response curves with recommended equalizer settings for Tin HiFi P1 Sealed all.
You can additionally look for Tin HiFi P1 Sealed all
- Simple report for dummies with explanations of the main characteristics
- Main professional characteristics report
- Compatibility with amplifier sources
С 2024 года измерения полноразмерных наушников в RAA проводятся не только на инструментальных стендах, но и вживую с помощью разработанной системы в RAA - Live Measurement System. Это позволяет увидеть реальное поведение наушников и их вариативность звучания относительно стандартных стендов. Результаты таких измерений в отчетах обозначаются как со стендов Human. В этом отчете - это:
Т.к. АЧХ зависит от посадки наушников и их прогрева/износа, то в RAA была разработан универсальный комплект Live Measurement System
для контроля своих наушников на собственной голове. Типовые комплекты доступны для приобретения.
Target curves and Tin HiFi P1 Sealed all
Stand: SIEC
Stand: IEC711 Coupler
Brief information
Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.
Similar to Tin HiFi P1
Стенд: SIEC
| Name | Deviation of frequency response |
| Tin HiFi P1 Default | 0.76 |
| Hifiman Re0 | 0.90 |
| AAW Halcyon Normal | 0.98 |
| Astrotec AX-7 | 1.00 |
| Phonak Audeo PFE 112 Light Grey Filter | 1.01 |
| SoftEars Twilight | 1.02 |
Выборка из 1056 протестированных моделей через стенд SIEC.
Стенд: IEC711 Coupler
| Name | Deviation of frequency response |
| Tin HiFi P1 Default | 0.42 |
| ikko OH1s | 1.63 |
| Kinera Celest Pandamon | 1.94 |
| LETSHUOER Mystic 8 | 1.98 |
| Sound Rhyme SR5 | 2.07 |
| Huawei FreeBuds 5i | 2.11 |
Выборка из 192 протестированных моделей через стенд IEC711 Coupler.
Brief information
Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.
Other summary reports for Tin HiFi P1 Sealed all headphone
More detailed
Measurements of Tin HiFi P1 Sealed all were carried out by Roman Kuznetsov on the hardware-software complex RAA.
The Tin HiFi P1 Sealed all test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.
I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a source amplifier and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.
Kuznetsov Roman
Founder of RAA
Information for Authors. You can freely use the graphics in your articles with a link to us.
Tin HiFi P1 is available in reports and services. You are in a professional report.
Information for entry level users
reports for a newbie (Headphones)
reports for a newbie (Headphones)
Information for professionals
reports for a pro (Headphones)
reports for a pro (Headphones)
- Comparison the frequency response
- Impedance
- Electric phase
- QSD / Watterfall
- Comparison of the frequency response/SPL of the bundles of headphones and amplifiers
- Voltage and Sensitivity
- SPL from bundle
- Impulse, Envelope, Step responses and Square wave
- Selection of headphones for the target frequency response
- Export Frequency response
Original text in Russian page. Translation page is not yet ready
You can help with translation via the: facebook and feedback.
