TEST Beyerdynamic DTX 101 iE Final Audio Measurement's report - Reference Audio Analyzer

Reports / TEST / Beyerdynamic DTX 101 iE / Final Audio - report for a pro

TEST Beyerdynamic DTX 101 iE: Final Audio (report for a pro)

After testing in the benchmark mode in the Reference Audio Analyzer software, the data is added to the online database of the RAA website.

You can view the test results on the comparison pages and summary reports for beginners and professionals. You can go to the desired report or comparison/selection service through the menu on this page. Additionally, you can go to the comparison pages from any graph in this report and add other tested products for direct comparison.



This is a summary report of headphones for professionals.

You can additionally look for TEST Beyerdynamic DTX 101 iE Final Audio






Sensitivity average in band from 100 Hz - 10 kHz108.6dB/V SPL
93.9dB/mW SPL
Impedance average in band from 40 Hz - 15 kHz33.8ohm
For 90 dB SPL, a voltage is required-18.6dBV
0.118VRMS
Taking into account the peak factor of 9 dB for the music signal-9.6 dBV
0.331VRMS
Measurements were performed on the stand:SIEC


С 2024 года измерения полноразмерных наушников в RAA проводятся не только на инструментальных стендах, но и вживую с помощью разработанной системы в RAA - Live Measurement System. Это позволяет увидеть реальное поведение наушников и их вариативность звучания относительно стандартных стендов. Результаты таких измерений в отчетах обозначаются как со стендов Human. В этом отчете - это:

Т.к. АЧХ зависит от посадки наушников и их прогрева/износа, то в RAA была разработан универсальный комплект Live Measurement System для контроля своих наушников на собственной голове. Типовые комплекты доступны для приобретения.


Frequency response TEST Beyerdynamic DTX 101 iE Final Audio headphone

АЧХ - Стенд: SIEC

Your browser does not support Canvas
Graphics setting view
Channel

Range

Frequency band

Smoothing


Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Impedance / Electric phase TEST Tips Beyerdynamic DTX 101 iE - Final Audio headphone

Your browser does not support Canvas
Graphics setting view
Channel

Frequency band


Channel:LeftRight
Impedance average in band from 40 Hz - 15 kHz33.8 33.8ohm
Resistance at 1 kHz33.7 33.8ohm
Resistance at 500 Hz33.6 33.6ohm
The minimum value in band from 40 Hz - 15 kHz33.5 33.5ohm
The maximum value in band from 40 Hz - 15 kHz36.3 35.4ohm


Your browser does not support Canvas
Graphics setting view
Channel

Range

Frequency band


Channel:LeftRight
Phase deviation is the average in the range 40 Hz - 15 kHz0.7 0.7°
Phase at 1 kHz1.2 1.1°
Phase at 500 Hz0.6 0.6°
The minimum value in band from 40 Hz - 15 kHz-1.5 -1.0°
The maximum value in band from 40 Hz - 15 kHz3.8 3.7°



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Frequency response and sensitivity TEST Tips Beyerdynamic DTX 101 iE - Final Audio headphone

Your browser does not support Canvas
Graphics setting view
Channel

Frequency band

Smoothing


Channel:LeftRight
Sensitivity average in band from 100 Hz - 10 kHz108.6 108.6dB/V SPL
Sensitivity average in band from 100 Hz - 10 kHz93.993.9 dB/mW SPL
Sensitivity at 1 kHz108.4108.4dB/V SPL
Sensitivity at 500 Hz109.1109.1dB/V SPL


Your browser does not support Canvas
Graphics setting view
Type of chart

SPL


SPLVoltageCurrentPower
dB SPLdBVVRMSdB(mA)mAdBmmW
6075.6600510517768490.31066958553
7085.61898911556188510010669585531
8095.6600481251776837110106695855310
9010618988913556188511201066958553104
1001166004821451776836813010669585531044
110126189889115556188514140106695855310443
12013660048201651776836841501066958553104428
1301461898890817556188514316010669585531044274



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.



Other summary reports for TEST Tips Beyerdynamic DTX 101 iE - Final Audio headphone

report for a newbie

Your browser does not support CanvasA simple report for beginners with explanations of the main characteristics.

Compatibility with amplifier sources

Your browser does not support CanvasA report evaluating the compatibility of TEST Beyerdynamic DTX 101 iE Final Audio with various amplifier sources.

Target curves and equalization

Your browser does not support CanvasA report with an assessment of compliance with target curves and recommended settings for TEST Beyerdynamic DTX 101 iE Final Audio equalization



More detailed

Measurements of TEST Beyerdynamic DTX 101 iE Final Audio were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The TEST Beyerdynamic DTX 101 iE Final Audio test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a source amplifier and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com



Information for Authors. You can freely use the graphics in your articles with a link to us.




TEST Beyerdynamic DTX 101 iE is available in reports and services. You are in a professional report.

Information for entry level users


Information for professionals









Original text in Russian page. Translation page is not yet ready

You can help with translation via the: facebook and feedback.