After testing in the benchmark mode in the Reference Audio Analyzer software, the data is added to the online database of the RAA website.
You can view the test results on the comparison pages
and summary reports for beginners
and professionals. You can go to the desired report or comparison/selection service through the menu on this page. Additionally, you can go to the comparison pages from any graph in this report and add other tested products for direct comparison.
This is the Sennheiser HD 600 compatibility report with amplifier sources.
You can additionally look for Sennheiser HD 600
You can view the test results on the comparison pages
and summary reports for beginners and professionals. You can go to the desired report or comparison/selection service through the menu on this page. Additionally, you can go to the comparison pages from any graph in this report and add other tested products for direct comparison.This is the Sennheiser HD 600 compatibility report with amplifier sources.
You can additionally look for Sennheiser HD 600
- Simple report for dummies with explanations of the main characteristics
- Main professional characteristics report
- Recommendations for equalization and comparison with target curves
С 2024 года измерения полноразмерных наушников в RAA проводятся не только на инструментальных стендах, но и вживую с помощью разработанной системы в RAA - Live Measurement System. Это позволяет увидеть реальное поведение наушников и их вариативность звучания относительно стандартных стендов. Результаты таких измерений в отчетах обозначаются как со стендов Human. В этом отчете - это:
Т.к. АЧХ зависит от посадки наушников и их прогрева/износа, то в RAA была разработан универсальный комплект Live Measurement System
для контроля своих наушников на собственной голове. Типовые комплекты доступны для приобретения.
Variation in frequency response with amplifiers with constant output resistance
| Channel: | Left | Right | |
| Sennheiser HD 600 + TEST 0 ? | 0.0 | 0.0 | dB |
| Sennheiser HD 600 + TEST 10 ? | 0.1 | 0.1 | dB |
| Sennheiser HD 600 + TEST 20 ? | 0.2 | 0.2 | dB |
| Sennheiser HD 600 + TEST AMP 50 Ω | 0.5 | 0.5 | dB |
| Sennheiser HD 600 + TEST 100 ? | 0.8 | 0.8 | dB |
| Sennheiser HD 600 + TEST 300 ? | 1.8 | 1.8 | dB |
Brief information
Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.
On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response
Variation in frequency response with amplifiers with constant output resistance
| Channel: | Left | Right | |
| Sennheiser HD 600 + TEST 0 ? | 0.0 | 0.0 | dB |
| Sennheiser HD 600 + TEST ? 0 ? | -0.2 | -0.2 | dB |
Brief information
Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.
On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response
Sensitivity and compatibility with amplifiers
Brief information
Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.
Other summary reports for Sennheiser HD 600 headphone
More detailed
Measurements of Sennheiser HD 600 were carried out by Roman Kuznetsov on the hardware-software complex RAA.
The Sennheiser HD 600 test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.
I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a source amplifier and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.
Kuznetsov Roman
Founder of RAA
Information for Authors. You can freely use the graphics in your articles with a link to us.
Sennheiser HD 600 is available in reports and services. You are in a professional report.
Information for entry level users
Information for professionals
Comparison of on-line graphs
Comparison of on-line graphs
- Comparison the frequency response
- Impedance
- Electric phase
- QSD / Watterfall
- Comparison of the frequency response/SPL of the bundles of headphones and amplifiers
- Voltage and Sensitivity
- SPL from bundle
- Impulse, Envelope, Step responses and Square wave
- Selection of headphones for the target frequency response
- Export Frequency response
Original text in Russian page. Translation page is not yet ready
You can help with translation via the: facebook and feedback.
