Compatibility with amplifier sources Snowy88 A5 - Reference Audio Analyzer

Reports / Snowy88 / A5 - Compatibility with amplifier sources

Snowy88 A5 - Compatibility with amplifier sources

After testing in the benchmark mode in the Reference Audio Analyzer software, the data is added to the online database of the RAA website.

You can view the test results on the comparison pages and summary reports for beginners and professionals. You can go to the desired report or comparison/selection service through the menu on this page. Additionally, you can go to the comparison pages from any graph in this report and add other tested products for direct comparison.



This is the Snowy88 A5 compatibility report with amplifier sources.

You can additionally look for Snowy88 A5







С 2024 года измерения полноразмерных наушников в RAA проводятся не только на инструментальных стендах, но и вживую с помощью разработанной системы в RAA - Live Measurement System. Это позволяет увидеть реальное поведение наушников и их вариативность звучания относительно стандартных стендов. Результаты таких измерений в отчетах обозначаются как со стендов Human. В этом отчете - это:

Т.к. АЧХ зависит от посадки наушников и их прогрева/износа, то в RAA была разработан универсальный комплект Live Measurement System для контроля своих наушников на собственной голове. Типовые комплекты доступны для приобретения.


Variation in frequency response with amplifiers with constant output resistance

Your browser does not support Canvas
Graphics setting view
Channel

Stand

Range

Frequency response

Variation in frequency response with amplifiers with constant output resistance @ 20 Hz - 15 kHz
Channel:LeftRight
Snowy88 A5 + TEST 0 ? 0.00.0dB
Snowy88 A5 + TEST 10 ? 3.33.1dB
Snowy88 A5 + TEST 20 ? 5.45.2dB
Snowy88 A5 + TEST 50 ? 9.28.8dB
Snowy88 A5 + TEST 100 ? 12.111.7dB
Snowy88 A5 + TEST 300 ? 15.815.4dB



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response



Variation in frequency response with amplifiers with constant output resistance

Your browser does not support Canvas
Graphics setting view
Channel

Stand

Range

Frequency response

Variation in frequency response with amplifiers with constant output resistance @ 40 Hz
Channel:LeftRight
Snowy88 A5 + TEST 0 ? 0.00.0dB
Snowy88 A5 + TEST ? 0 ? -1.6-1.5dB



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.

On the frequency response comparison page, there is an export option and additional tools for adjusting the frequency response



Sensitivity and compatibility with amplifiers

Low-power sources

Your browser does not support Canvas
Graphics setting view
Type of chart

Sound pressure for the environment


Mid-power sources

Your browser does not support Canvas
Graphics setting view
Type of chart

Sound pressure for the environment


Hi-power sources

Your browser does not support Canvas
Graphics setting view
Type of chart

Sound pressure for the environment



Brief information

Clicking on the graph will take you to the comparison page of different models with advanced graph display settings.





Other summary reports for Snowy88 A5 headphone

report for a newbie

Your browser does not support CanvasA simple report for beginners with explanations of the main characteristics.

The main professional report

Your browser does not support CanvasMain Features and Graphics for Snowy88 A5

Target curves and equalization

Your browser does not support CanvasA report with an assessment of compliance with target curves and recommended settings for Snowy88 A5 equalization



More detailed

Measurements of Snowy88 A5 were carried out by Roman Kuznetsov on the hardware-software complex RAA.

The Snowy88 A5 test was conducted as a black box test, without regard to cost and prestige. This is the basic principle for making measurements, measurement reports and developing tests in RAA.

I believe that it is important to do not make an absolute assessment of the device, but an aggregate assessment when working together with a source amplifier and taking into account external factors. This allows you to effectively reveal the potential of the entire set of devices or to make a more optimal choice of components.




Kuznetsov Roman
Founder of RAA



Known by the nickname romanrex
Аuthor of articles iXBT.com



Information for Authors. You can freely use the graphics in your articles with a link to us.










Original text in Russian page. Translation page is not yet ready

You can help with translation via the: facebook and feedback.




Comments

No comments to Snowy88 A5
Commentary view:





Want to leave a comment or ask a question? Register now or log in