Voltage and Sensitivity - Direct comparison of graphs RAA


Voltage and Sensitivity - Direct comparison of graphs

Your browser does not support Canvas 
Cursor:
Marker, Start: - , End: -



General Graph Display Options

Type of chart:

Graph Display Type:

RAW coordinates:

Peak factor in the unevenness of the music volume:
dB
Desired SPL sound pressure level when listening to music:
dB SPL



Parameters of the axis of the graph

Loaded impedance headphones:
- ohm
Display impedance value in dB(ohm) :

:

Range of Voltage:
- dBV
Step of scale

Step of scale:
dB



Other parameter

Selected headphones

Markers(Headphones) (No select):

Visible:

Show title of devices:

Location of names:

Location of names(Headphones):

Alternative device names:




Link to this page with the selected parameters


Copy link
Download the chart

Graph display options (display, color, menu, delete) and the main characteristics of the selected devices

Headphone amplifiers
Headphones
Menu Delete Close Name Color Operating mode of the amplifiers Voltage, dBV/VRMS Current, dB(mA)/mA Impedance , ohm
EXEQ P-1001 Linear Mode -17.93 / 0.13 -2.89 / 0.72 57.76
Optimal Mode -3.00 / 0.71 8.17 / 2.56
Hard Mode -3.00 / 0.71 20.54 / 10.64
Maximum or before clipping level -3.00 / 0.71 24.96 / 17.70
Menu Delete Close Color Style Stand Close Sensitivity of voltage
dB/V SPL
Impedance
ohm
Voltage
dBV/VRMS
99 dB SPL
HDM-X Kennerton Vali 116.4 44.3 -17.4/0.14





Display headphones at specified limits
Voltage, dBV Current, dB(mA) Output Impedance, ohm
Topper limit
Lower limit







Saving and switching to other services
Go to other services with the selected headphones from this service


Available only to registered users with Pro account

Save selected devices to the favorite group :


List and setting of Groups




Save to the new favorite group:



Save the graphics to your favorites

Available only to registered users with Pro account


Maximum level of the load
Loaded impedance headphones ohm

Marker:
Operating mode of the amplifiers Linear Mode Optimal Mode Hard Mode Maximum or before clipping level No Current limit
dBV / VRMS dBV / VRMS dBV / VRMS dBV / VRMS dBV / VRMS
EXEQ P-1001 -32.8 / 0.0 -21.7 / 0.1 -12.0 / 0.3 -12.0 / 0.3 -12.0 / 0.3



About maximum voltage levels of the load

To compare the amplifiers for loudness from the impedance, set the required impedance value.




Рекомендации совместимости наушников c усилителями на основе технических характеристик

Kennerton Vali + EXEQ P-1001

With the measured characteristics of the Kennerton Vali, sensitivity of 116.4 dB/V SPL and impedance of 44.3 ohms, with the EXEQ P-1001 the average volume on the music signal of 90 дБ SPL in pure mode will not be provided. This requires an amplifier with a voltage of -17.4 dBV and a current of 9.7 dB(mA) (With uneven volume during a music track up to 9 dB). EXEQ P-1001 can provide voltages up to -25.2 dBV and up to a current of -2.9 dB(mA). Due to the current limit, the maximum voltage with a headphone impedance of 44.3 Ohm in pure mode will be -30.0 dBV.

P-1001 with Kennerton Vali will provide the best sound quality in the volume range from 75.1 to 77.4 dB SPL. Thus, relative the reference level of 90dB SPL there is no any margin by the volume up.


О рекомендациях


Рекомендации составлены для среднего уровня громкости при прослушивании музыки в 90 дБ SPL c учетом неравномерности громкости по музыкальному треку в виде пик-фактора в 9 дБ. Если Вам нужен анализ для другого звукового давления, или для определенной музыки с иным пик-фактором, задайте в настройках альтернативные значения для "Desired SPL sound pressure level when listening to music" и "Peak factor in the unevenness of the music volume". По умолчанию параметры не учитывают окружающую обстановку или шумоизоляцию наушников, предполагая, что прослушивание производится днем качественной не перекомпрессированной музыки. При анализе прослушивания музыки ночью в спокойной обстановке, стоит уменьшить звуковое давление на 12-15 дБ.

Выше на графике показаны зоны напряжения от нагрузки. Для наушников высчитывается необходимое напряжение, которое должно быть на выходе усилителя и оценивается с тем напряжением, которое может усилитель выдать. Если усилитель способен выдать большее напряжение, то высчитывается дополнительный запас по прибавке громкости или указывается, насколько громкости может не хватить. Аналогично считается и запас по регулировке громкости вниз. В большинстве случаев, при снижении громкости снижается и параметр сигнал/шум, из-за чего становится слышимым фоновый шум. При использовании аналоговых регуляторов в минимальных положениях часто наблюдается дисбаланс каналов. Диапазон регулировки громкости установлен как дБ. Если Вам известно, что устройство обладает более высокими соотношением сигнал-шум, или использует качественную реализацию регулировки громкости через реле, то увеличьте в настройках параметр "Optimal range of volume control".


Рекомендации описывают график. На графике по горизонтали отображена ось сопротивлений подключаемых наушников. По вертикали ось напряжения на выходе усилителя в единицах dBV. Точками на графике отображается необходимое напряжение для наушников для заданного звукового давления. В самом лучшем случае точка должна быть в середине по вертикали голубой зоны.

Голубая зона является наиболее качественным режимом усилителя.




Add headphones from selected manufacturers



Add amplifiers from selected manufacturers




Custom AMP

Name



Voltage dBV

CurrentdB(mA)

Output Impedance ohm




Headphones

Name



Sensitivity of voltage dB/V SPL

Impedance ohm




Graph of Sensitivity


Graph of Sensitivity

Name



Sensitivity







For a regular account, only the default set group is available.

Only PRO account users can create and upload their sets.





Brief information

Information materials and additional articles about the schedule
  

 





it is a translation from the Russian language. Original text in Russian page.

You can help us with the correct translation into English.

Select incorrect text and press Ctrl+Enter, facebook and feedback
Thank You!