software and hardware complex for measurements, analytics and generation of reports by audio products
 home | news | online calculators | on-line selection of the parameters | test reports | F.A.Q. | forum | about RAA
Types of reports (test suite): Headphones | Headphone amplifiers (internal amp: DAP, sound cards, DACs) | DAC (Line out: DACs, sound cards and DAPs)
report for a pro | report for a newbie

Sennheiser CX 200 Street II

Total reports 1 from Sennheiser CX 200 Street II


About this report

This is a headphone report for professionals.
You can see a simple report for "dummies" with explanations of the main characteristics for Sennheiser CX 200 Street II

One product can have multiple reports in different modes and with different a suite of tests.

Test report - general data headphone Sennheiser CX 200 Street II

Frequency response, Impedance, Frequency response with standard AMPs


Graphics setting view
Frequency band, Hz:
Range, dB:

Perception of headphone frequency response curves of equal loudness ISO 226-2009

General results

General results Sennheiser CX 200 Street II
Channel
Center/Summary
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
129,0
Impedance average in band from 40 Hz to 15 kHz, Ohm
16,7
For 94,0 dB SPL need, VRMS
0,018
For 94,0 dB SPL need, mW
0,019

The table shows the most important technical characteristics Sennheiser CX 200 Street II

*Center channel headphone is received by averaging the frequency response between the left and right channels

  • Type of headphones: in-ear or tablet
  • Measurements were performed on the stand:
    • with solid simulator-bushing SIEC for emulation of auditory channel
  • Calculate headphone's SPL Sennheiser CX 200 Street II taking into amplifier by online calculator based on table's data
  • Headphone: Low-impedance
  • The type of acoustic design: closed
 The tags (specifications) for this report are:
Type of product :
Headphones tested in :
Headphones tested on :
Type of headphones :
The type of acoustic design: :

If some tags are assigned incorrectly or not all are added, select it as appropriate and send it for moderation.




 

Comparison the frequency response of headphones

How much frequency response of the Sennheiser CX 200 Street II different from other models?
Comparison the frequency response graph of Sennheiser CX 200 Street II on-line.

Comparison of frequency response and sensitivity.

Comparison of basic characteristics

How much are the characteristics of Sennheiser CX 200 Street II different from other models?
Compare the Sennheiser CX 200 Street II with other tested headphone models

In the general table, you can compare the characteristics:
  • Sensitivity of voltage
  • Sensitivity of power
  • Impedance

Determination of the required voltage level from the headphone amplifier and comparison with other models

What voltage range from the amplifier is needed for the Sennheiser CX 200 Street II ?
Comparison of on-line graphs with additional analytics of compatibility with specific amplifiers.

In comparison, the required voltage value, which the amplifier should provide for the selected sound pressure, is determined. According to the voltage graphs from the measured amplifiers, built according to the "musical" power, you can select the most successful amplifiers for the Sennheiser CX 200 Street II headphones. You can select several headphones and several amplifiers in the selection.

The voltage chart for musical power and the relationship with the sensitivity of headphones are developed in RAA

Selection by characteristics

You can use the automatic selection of the optimal AMP models for Sennheiser CX 200 Street II from the measured power parameters of the amplifying part and the measured parameters of the headphones for different purpose of use.

During the selection of AMPs, they are selected according to the characteristics and on a five-point scale are estimated the optimal bundles of headphones and Sennheiser CX 200 Street II . The selection takes into account the power characteristics of the amplifier, the sensitivity and resistance of the headphones, as well as the conditions in which the bundle will be used: at home, in the studio, on the street, in the subway, etc. The compatibility analysis is similar to car analysis based on its clearance - on which road the car will optimally go without evaluating the class of the car.

A detailed description in plain language on an example with Sennheiser CX 200 Street II is in the simple report for "dummies".

The selection method by characteristics is developed in RAA.


Detailed measurements report of technical characteristics



Report content

Sensitivity headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Channel:

  • Type of headphones: in-ear or tablet
  • Measurements were performed on the stand:
    • with solid simulator-bushing SIEC for emulation of auditory channel
Calculate headphone's SPL Sennheiser CX 200 Street II with the amplifier it is possible in an online calculator based on the data in the table

Sensitivity Sennheiser CX 200 Street II
Channel
Left
Right
Sensitivity average in band from 100 Hz to 10 kHz, dB/V
128,1
129,7
Sensitivity at 500 Hz at 1 V, dB
125,1
126,8
Sensitivity at 500 Hz at 1 mW, dB
107,3
109,0
Sensitivity at 1000 Hz at 1 V, dB
124,3
125,1
Sensitivity at 1000 Hz at 1 mW, dB
106,5
107,3

The sensitivity was calculated by data from the measuring stand SIEC


Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Frequency response headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:

  • Type of headphones: in-ear or tablet
  • Measurements were performed on the stand:
    • with solid simulator-bushing SIEC for emulation of auditory channel
Frequency response Sennheiser CX 200 Street II
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-11,39, 9,63
-11,07, 9,36


The RMS variation between the right and left channels
Sennheiser CX 200 Street II from stand SIEC
Deviation between channels in band 40 Hz to 15 kHz, dB
1,0
Deviation between channels in low-frequency range 40 Hz to 200Гц, дБ
0,4
Deviation between channels in mid-frequency range 200 Hz to 2 kHz, dB
0,5
Deviation between channels in hi-frequency range 2 kHz 15 kHz, dB
1,4

Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Impedance headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Channel:

Impedance Sennheiser CX 200 Street II
Channel
Left
Right
Impedance average in band from 40 Hz to 15 kHz, Ohm
16,7
16,7
Resistance at 500 Hz, Ohm
16,5
16,6
Resistance at 1000 Hz, Ohm
16,6
16,6
The minimum value in band from 40 Hz to 15 kHz at frequency, Hz
150,8
50,1
The minimum value in band from 40 Hz to 15 kHz, Ohm
16,5
16,5
The maximum value in band from 40 Hz to 15 kHz at frequency, Hz
2819,2
2819,2
The maximum value in band from 40 Hz to 15 kHz, Ohm
19,0
18,5

Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Electric phase headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Range, degree:
Channel:

Electric phase Sennheiser CX 200 Street II
Channel
Left
Right
Average variation in phase response in band from 20 Hz to 20 kHz, degree
1,4
1,4
The minimum value in band from 20 Hz to 20 kHz at frequency, Hz
3126,2
3126,2
The minimum value in band from 20 Hz to 20 kHz, degree
-2,8
-2,4
The maximum value in band from 20 Hz to 20 kHz at frequency, Hz
19741,4
19741,4
The maximum value in band from 20 Hz to 20 kHz, degree
8,5
8,4

Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Frequency response of amplifier with constant output resistance from headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:

Frequency response of headphone Sennheiser CX 200 Street II with amplifier with a constant impedance
Channel
Left
Right
Variation in FR from AMP 0 Ohm in band 100 Hz to 10 kHz, dB
-11,39, +9,63
-11,07, +9,36
Variation in FR from AMP 10 Ohm in band 100 Hz to 10 kHz, dB
-11,40, +9,96
-11,09, +9,34
Variation in FR from AMP 20 Ohm in band 100 Hz to 10 kHz, dB
-11,41, +10,12
-11,10, +9,33
Variation in FR from AMP 50 Ohm in band 100 Hz to 10 kHz, dB
-11,42, +10,33
-11,11, +9,32
Variation in FR from AMP 100 Ohm in band 100 Hz to 10 kHz, dB
-11,42, +10,45
-11,12, +9,31
Variation in FR from AMP 300 Ohm in band 100 Hz to 10 kHz, dB
-11,42, +10,55
-11,12, +9,30

Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Variation in frequency response with amplifiers with constant output resistance from headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:

Variation in frequency response with amplifiers with constant output resistance from Sennheiser CX 200 Street II
Channel
Center/Summary
With amplifier impedance at 10 Ohm in band 20 Hz to 20 kHz, dB
0,4
With amplifier impedance at 20 Ohm in band 20 Hz to 20 kHz, dB
0,6
With amplifier impedance at 50 Ohm in band 20 Hz to 20 kHz, dB
0,8
With amplifier impedance at 100 Ohm in band 20 Hz to 20 kHz, dB
1,0
With amplifier impedance at 300 Ohm in band 20 Hz to 20 kHz, dB
1,1

*Center channel is received by data averaging between the left and right channels


Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Frequency response with an amplifier with zero output resistance and raising of output resistance in low frequencies from headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:

Frequency response with an amplifier with zero output resistance and raising of output resistance in low frequencies from Sennheiser CX 200 Street II
Channel
Left
Right
Variation in frequency response in band from 100 Hz to 10 kHz, dB
-11,22, 9,79
-10,90, 9,53

Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Variation in frequency response an amplifier with zero output resistance with raising-up of output resistance in low frequencies from headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Range, dB:
Channel:

Variance of frequency response Sennheiser CX 200 Street II depending on the total output resistance of the amplifier with zero resistance and a rise of resistance at low frequencies
Variance frequency response at the frequency 20 Hz, dB
-8,2
Variance frequency response at the frequency 40 Hz, dB
-3,8
Variance frequency response at the frequency 80 Hz, dB
-1,5

Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Perception of headphone frequency response curves of equal loudness ISO 226-2009 from headphone Sennheiser CX 200 Street II


Graphics setting view
Channel:

Perception of headphone frequency response curves of equal loudness ISO 226-2009 from Sennheiser CX 200 Street II
Channel
Center/Summary
From level 48 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,0, +17,5
From level 36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,0, +14,4
From level 24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,0, +11,3
From level 12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,1, +8,3
From level 0 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,3, +8,2
From level -12 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,4, +9,3
From level -24 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,5, +10,3
From level -36 dB at 72 dB SPL in band 100 Hz to 10 kHz, dB
-11,5, +11,4

*Center channel is received by data averaging between the left and right channels


Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Impulse response headphone Sennheiser CX 200 Street II


Graphics setting view
Time, ms:
Channel:


Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.



Impulse Response Envelope (ETC - Energy Time Curve) headphone Sennheiser CX 200 Street II


Graphics setting view
Time, ms:
Range, dB:
Channel:


Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.



Step response headphone Sennheiser CX 200 Street II


Graphics setting view
Time, ms:
Channel:


Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.



QSD / Watterfall headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Channel:


Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.

Delta QSD / Delta Watterfall headphone Sennheiser CX 200 Street II


Graphics setting view
Frequency band, Hz:
Channel:


Translation of the description is not yet ready

Original text in Russian report. You can help with translation via the forum or feedback.



Share report

If you notice a typo or other inaccuracy, then select it and press Ctrl+Enter. This will accelerate the process of improving the reports.

The original language of the report in Russian. If the text in the report is unclear, use online translators Russian-language report (and help with the correct translation into English)

Glossary: RUS, ENG. To display on page ID need to enable debug mode.

Debug mode: Switch ON

Follow





 



Total reports 1 from Sennheiser CX 200 Street II